Engineering Drawing MCQ

Test your knowledge with important Engineering Drawing MCQ and their applications. These MCQs are beneficial for competitive exams too. Explore 30+ more Engineering Drawing MCQs on Bissoy. Bissoy App

• An advantage of this type of view is that each view shows the object all the way through as if it were transparent:
  ক

  Planar

  খ

  Horizontal

  গ

  Auxiliary

  ঘ

  Orthographic
• By using a ________ section of a cylindrical mechanical part the drafter should be able to show only one view of the part.
  ক

  Half

  খ

  Whole

  গ

  Revolved

  ঘ

  Broken out
• The principle reason for using an auxiliary view is ________.
  ক

  To eliminate hidden lines

  খ

  To create a true projection plane from an inclined plane in one of the primary views

  গ

  To show cylinders as ellipses

  ঘ

  To locate center marks
• This is a curve showing the displacement of the follower as ordinates on a base line that represents one revolution of the cam:
  ক

  Displacement diagram

  খ

  Follower

  গ

  Cam cycle

  ঘ

  Reciprocation chart
• When dimensioning piping drawings, you give the lengths of all runs of this type:
  ক

  Straight

  খ

  Angular

  গ

  Filleted

  ঘ

  Transverse
• In some circumstances an entire drawing can be inserted into a different drawing as a block. When this is used the base point will default to _________.
  ক

  0, 0

  খ

  10, 10

  গ

  20, 20

  ঘ

  30, 30
• These are joined together in the field to build a structure:
  ক

  Riveted members

  খ

  Main members

  গ

  Steel fabrications

  ঘ

  Assembled fabrications
• In architectural drawing ________ are often used to illustrate and detail structural components.
  ক

  Foundation beam detail sections

  খ

  Wall sections

  গ

  Building sections

  ঘ

  All of the above
• This practice considers an individual part's dimensions and tolerances and that part's relation to its related parts:
  ক

  Applying allowances

  খ

  Geometric dimensioning and tolerancing

  গ

  Creating datum references

  ঘ

  Angular dimensioning tolerances
• This is the range of digital or hard copy documents that specify the physical function requirements for a product:
  ক

  Product design

  খ

  Product definition

  গ

  Drawing definition

  ঘ

  Engineering design
• The site plan illustrates _________.
  ক

  The floor plan

  খ

  Where the house sits on the property

  গ

  The roof plan

  ঘ

  Where the garage and driveway are located
• An accurate record of changes made to release drawings is tracked via this:
  ক

  A revision block

  খ

  The basic title form

  গ

  Working drawings

  ঘ

  Portable documents
• If a plane is parallel to the plane of projection, it appears:
  ক

  True size

  খ

  As a line or edge

  গ

  Foreshortened

  ঘ

  As an oblique surface
• Approximately this much of the cost of product development and manufacture is determined at the design stage:
  ক

  40 - 50%

  খ

  60 - 75%

  গ

  70 - 80%

  ঘ

  75 - 85%
• In order to create an isometric circle to represent a hole through the top surface of a box, the drafter must insure that the correct iso-plane has been selected by scrolling through the iso-planes using the ________ key.
  ক

  F1

  খ

  F3

  গ

  F5

  ঘ

  F8
• Center lines are used to locate or represent the centers of ________.
  ক

  Arcs

  খ

  Circles

  গ

  Hidden round features

  ঘ

  All of the above
• In multi-view drawing it is common practice to include three views, the front, the top and the right side. If no dimensions are required on the right side view the drafter can ________.
  ক

  Leave the view as is

  খ

  Eliminate the view

  গ

  Use the left view instead

  ঘ

  None of the above
• Acceptable parts must not extend beyond this:
  ক

  Boundary limits

  খ

  Hole limits

  গ

  Specification

  ঘ

  Tolerances
• This type of weld is the most common in structural steel fabrication:
  ক

  Fillet weld

  খ

  Beam weld

  গ

  Rivet weld

  ঘ

  Structural weld
• This is a line terminated by arrowheads, indicating the direction and extent of a dimension:
  ক

  Dimension line

  খ

  Extension line

  গ

  Arrowhead line

  ঘ

  Centerline
• Most architectural drawings produced for field use by building contractors are printed on architectural "D" size paper which measures __________.
  ক

  24" × 36"

  খ

  18" × 24"

  গ

  11" × 17"

  ঘ

  34" × 22"
• Geometric primitives include shapes such as ________.
  ক

  Boxes

  খ

  Cylinders

  গ

  Wedges

  ঘ

  All of the above
• In a CAD system, you can draw an ellipse by specifying these:
  ক

  The bounding lines

  খ

  The midpoint and end points

  গ

  The center and major and minor axes

  ঘ

  The center and radius
• The Offset tool should only be used for placing _________ in an isometric drawing.
  ক

  Circles

  খ

  Horizontal lines

  গ

  Vertical lines

  ঘ

  None of the above
• This type of thread is a thread on the inside of a member:
  ক

  Basic thread

  খ

  External thread

  গ

  Internal thread

  ঘ

  Major diameter thread
• When using the descriptive geometry method to create an auxiliary view the drafter should _________.
  ক

  Rotate the snap grid to the same angle of the inclined plane

  খ

  Offset the right vertical line of the front view

  গ

  Rotate the top line of the front view 45 degrees

  ঘ

  Offset the top line of the front view 2 inches
• This line pattern is composed of three dashes, one long dash on each end with a short dash in the middle:
  ক

  Object

  খ

  Hidden

  গ

  Center

  ঘ

  Phantom
• In an oblique drawing, equally spaced partial circles may be used to show this:
  ক

  Symbolic thread pitch

  খ

  Ellipses

  গ

  Cavalier drawings

  ঘ

  Projection points
• Most architectural firms and mechanical design companies utilize different categories of blocks. These sets of blocks are usually housed in _________.
  ক

  Block vaults

  খ

  Block libraries

  গ

  Block books

  ঘ

  Block references
• This type of solid has a polygon for a base and triangular lateral faces that intersect at a vertex:
  ক

  Pyramid

  খ

  Prism

  গ

  Cone

  ঘ

  Torus