Related Questions

The velocity of the reciprocating roller follower when it has contact with the straight flanks of the tangent cam, is given by (where $$\omega $$ = Angular velocity of the cam shaft)
A $$\omega \left( {{{\text{r}}_1}{{\text{r}}_2}} \right)\sin \theta $$
B $$\omega \left( {{{\text{r}}_1} + {{\text{r}}_2}} \right)\sin \theta \sec 2\theta $$
C $$\omega \left( {{{\text{r}}_1}{{\text{r}}_2}} \right)\cos \theta $$
D $$\omega \left( {{{\text{r}}_1} + {{\text{r}}_2}} \right)\cos \theta \,{\text{cosec2}}\theta $$
The period during which the cam follower remains at rest, when cam moves, is known as
A Constant period
B Fixed period
C Dwell period
D Idle period
In a cam drive with uniform velocity follower, the sharp corners of the displacement diagram are rounded off at the beginning and at the end of each stroke. This is done
A Because of difficulty in manufacturing cam profile
B Because of loose contact of follower with cam surface
C In order to have acceleration in beginning and retardation at the end of stroke within the finite limits
D Because the uniform velocity motion is a partial parabolic motion
If the co-ordinates of A and B are (4, 1) and (-2, 7) respectively, then the co-ordinates of the midpoint of AB are.
A (1, 4)
B (-3, 4)
C (3, -4)
D (-1, 4)
The difference between CAD and CAM is that CAD software is directed at product design while CAM software is:
A concerned with production and control of tool design
B concerned with management programs
C designed for communications
D specifically for PC-board design
E None of the above
For high speed engines, the cam follower should move with
A uniform velocity
B simple harmonic motion
C uniform acceleration and retardation
D cyclodial motion
The cam follower generally used in automobile engines is
A knife edge follower
B flat faced follower
C spherical faced follower
D roller follower
In a radial cam, the follower moves
A in a direction perpendicular to the cam axis
B in a direction parallel to the cam axis
C in any direction irrespective of the cam axis
D along the cam axis
For low and moderate speed engines, the cam follower should move with
A uniform velocity
B simple harmonic motion
C uniform acceleration and retardation
D cycloidal motion
Throw of a cam is the maximum distance of the follower from
A base circle
B pitch circle
C root circle
D prime circle

Next steps