Related Questions

In order to set drawing limits for a 'C' size architectural drawing the drafter should set the limits to ________.
A 0, 0 and 2, 9
B 0, 0 and 17, 11
C 0, 0 and 18, 24
D 0, 0 and 34, 24
In an exploded assembly drawing it is customary for the drafter to use a ________ line to illustrate how parts fit together.
A Phantom
B Hidden
C Dashed
D Center
Isometric drawings are often used by ________ to help illustrate complex designs.
A Mechanical engineers
B Piping drafters
C Aerospace engineers
D All of the above
Most architectural drawings produced for field use by building contractors are printed on architectural "D" size paper which measures __________.
A 24" × 36"
B 18" × 24"
C 11" × 17"
D 34" × 22"
In U.S. structural and architectural drafting, all dimensions of this length are usually expressed in feet and inches:
A One inch or over
B One foot or over
C One yard or over
D One rod or over
Generally, the units used on an architectural drawing are set to __________.
A Architectural
B Engineering
C Metric
D Civil
When dimensioning architectural drawings architects will utilize both ________ and ________ options.
A Baseline and continuous
B Baseline and linear
C Quick dim and linear
D Linear and continuous
The text used on a typical detail sheet should be ________.
A Placed horizontally
B In bold text
C In an architectural text style
D None of the above
This type of structural steel drawing shows all dimensions necessary for fabrication:
A Shop drawings
B Design drawings
C Weldment drawings
D Application drawings
In some circumstances an entire drawing can be inserted into a different drawing as a block. When this is used the base point will default to _________.
A 0, 0
B 10, 10
C 20, 20
D 30, 30

Next steps