Related Questions

A drafter who develops technical drawings of a highway overpass would most likely be a ________ drafter.
In order to create an accurate assembly drawing the drafter should create the ________ drawings first.
In order to create an isometric circle to represent a hole through the top surface of a box, the drafter must insure that the correct iso-plane has been selected by scrolling through the iso-planes using the ________ key.
A ________ section allows the drafter to create a Cutting Plane line which is not in a straight line across the part.
When using the direct entry method to create a horizontal line exactly three inches long the drafter should ________ first.
When using the descriptive geometry method to create an auxiliary view the drafter should _________.
In order to set drawing limits for a 'C' size architectural drawing the drafter should set the limits to ________.
By using a ________ section of a cylindrical mechanical part the drafter should be able to show only one view of the part.
In developing a multi-view drawing, the drafter can use a ________ line to help locate the top and right side views.
In multi-view drawing it is common practice to include three views, the front, the top and the right side. If no dimensions are required on the right side view the drafter can ________.