Related Questions

A drafter who develops technical drawings of a highway overpass would most likely be a ________ drafter.
A Architectural
B Civil
C Mechanical
D Process piping
In order to set drawing limits for a 'C' size architectural drawing the drafter should set the limits to ________.
A 0, 0 and 2, 9
B 0, 0 and 17, 11
C 0, 0 and 18, 24
D 0, 0 and 34, 24
The architectural drafter usually begins a set of working drawings by creating the ________ plan first.
A Foundation
B Floor plan
C Elevations
D Building section
In an exploded assembly drawing it is customary for the drafter to use a ________ line to illustrate how parts fit together.
A Phantom
B Hidden
C Dashed
D Center
The daily workload of a ________ drafter would generally include technical drawings of machine parts.
A Architectural
B Civil
C Electrical
D Mechanical
An oil refinery relies on which type of drafter to maintain and update the technical piping drawings used for the construction and maintenance of the facility.
A Architectural
B Civil
C Process piping
D Electrical
Inserting blocks into a drawing file usually requires exacting placement. The drafter should insure that ________ is turned on.
A O Snaps
B Ortho
C Grid
D Dynamic Input
When setting up a mechanical drawing in Auto-CAD the drafter should set the units to ________.
A Fractional
B Decimal
C Architectural
D Metric
When using the direct entry method to create a horizontal line exactly three inches long the drafter should ________ first.
A Pull the line from away from the starting point very carefully
B Insure that Ortho is on
C Enter 3 for the length of the line
D Read the coordinate position on the Dynamic Readout
Before starting an isometric drawing in Auto-CAD the drafter needs to ________.
A Set the grid to isometric
B Set the current layer to Def-points
C Turn Object Snap off
D Turn Ortho off

Next steps