Related Questions

A drafter who develops technical drawings of a highway overpass would most likely be a ________ drafter.
A Architectural
B Civil
C Mechanical
D Process piping
Choose the sentence (s) in which the word 'straight means 'honest or frank'. (1) Draw a straight line through the two points. (2) You are not being straight with me, even though you know that I like straight answers. (3) It was a straight choice between taking or leaving the offer of friendship.
A (1)
B (3)
C (1) and (2)
D 1) and (3)
In order to create an accurate assembly drawing the drafter should create the ________ drawings first.
A Detail
B Title block
C Parts list
D Isometric
In order to create an isometric circle to represent a hole through the top surface of a box, the drafter must insure that the correct iso-plane has been selected by scrolling through the iso-planes using the ________ key.
A F1
B F3
C F5
D F8
When using the direct entry method to create a horizontal line exactly three inches long the drafter should ________ first.
A Pull the line from away from the starting point very carefully
B Insure that Ortho is on
C Enter 3 for the length of the line
D Read the coordinate position on the Dynamic Readout
By using a ________ section of a cylindrical mechanical part the drafter should be able to show only one view of the part.
A Half
B Whole
C Revolved
D Broken out
In this type of view, the cutting plane line indicates both the location of the cutting plane and the direction of sight:
A Removed section
B Revolved section
C Auxiliary section
D Partial section
In order to create one solid model from two or more separate solid shapes the drafter will need to position them and then ________.
A Use Union to join them
B Use the Join command
C Use the Add Parts tool
D None of the above
When only a small section of an interior area needs to be revealed the drafter can use a ________ section.
A Half
B Quarter
C Full
D Broken out
When creating a Cutting Plane line with Auto-CAD it is customary to use a ________ to create the line.
A Center line
B Polyline
C Dashed line
D Hatch line

Next steps