Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

For a fixed bias circuit the drain current was 1mA, what is the value of source current?
Consider the circuit shown below which reduces the impact of the input bias current. If IB1 = IB2 = Input bias current, then determine the value of R3 so that the output voltage (v0) is not impacted by the input bias current.
Which of the following conditions must be satisfied for a transistor to be in saturation? 1. Its collector to base junction should be under forward bias 2. Its collector to base junction should be under reverse bias 3. Its emitter to base junction should be under reverse bias 4. Its emitter to base junction should be under forward bias Which of the above conditions are correct?
If CT is the transition capacitance, which of the following are true? 1) in forward bias, CT dominates 2) in reverse bias, CT dominates 3) in forward bias, diffusion capacitance dominates 4) in reverse bias, diffusion capacitance dominates
For a self-bias circuit, find drain to source voltage if VDD=12V, ID=1mA, Rs=RD=1KΩ?
Consider the following statements regarding n-channel JFET: 1. The maximum drain current IDSS occurs when gate-to-source voltage VGS = 0 V and drain-to-source voltage VDS ≥ |VP|. (VP is pinch-off voltage). 2. For gate-to-source voltage VGS less than the pinch-off level, the drain current is 0 A. 3. For all levels of VGS between 0 V and the pinch-off level, the current ID will range between IDSS and 0 A, respectively. which of the above statements are correct ?
Consider an NMOS transistor having kn= 2 mA/V2. Let the transistor be biased at VOV = 1V. For operation in saturation, what dc bias current ID results? If a +0.1-V signal is superimposed on VGS, find the corresponding increment in collector current by evaluating the total collector current ID and subtracting the dc bias current ID.
For an emitter feedback bias circuit, RC is 10Kohm, Re= 5Kohm, RB = 1Kohm, If IC = 1mA, current gain is _________________
For a fixed bias circuit having RC=4.7KΩ and RB=1KΩ, VCC=10V, and base current at Bias point was found to be 0.2µA, Find β?
A permanent magnet moving coil ammeter has a coil resistance of 99ohm and Full Scale DeflectionFSD. current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is