Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Consider the following statements regarding n-channel JFET: 1. The maximum drain current IDSS occurs when gate-to-source voltage VGS = 0 V and drain-to-source voltage VDS ≥ |VP|. (VP is pinch-off voltage). 2. For gate-to-source voltage VGS less than the pinch-off level, the drain current is 0 A. 3. For all levels of VGS between 0 V and the pinch-off level, the current ID will range between IDSS and 0 A, respectively. which of the above statements are correct ?
Availability of drinking water is continuously decreasing. The government decided to identify those sources of drinking water which getting polluted. The following table depicts the number of polluted sources in a district. Source of drinking water getting polluted Number Wells 24 Handpump 12 Dam 12 Borewell 6 Ponds 18 The pictograph table for the above table will be (A) Source of drinking water getting polluted Number symbol = 6 source Wells Handpump Dam Borewell Ponds (B) Source of drinking water getting polluted Number symbol  = 6 source Wells Handpump Dam Borewell Ponds (C) Source of drinking water getting polluted Number symbol  = 6 source Wells Handpump Dam Borewell Ponds (D) Source of drinking water getting polluted Number symbol  = 6 source Wells Handpump Dam Borewell Ponds
When drain voltage equals the pinch-off-voltage, then drain current ___________ with the increase in drain voltage
Consider the following statements regarding reciprocity theorem : 1. In any passive linear bilateral network, if the single voltage source Vx, in branch x produces the current response Iy, in branch y, then the removal of the voltage source from branch x and its insertion in branch y will produce the current response iy in branch x. 2. The interchange of an ideal voltage source and an ideal ammeter in any passive, linear, bilateral circuit will not change the ammeter reading. 3. The interchange of an ideal current source and an ideal voltmeter in any passive linear bilateral circuit will change the voltmeter reading. Which of the above statements are correct ?
Which of the following statements are correct for an ideal constant voltage source? 1. Its output voltage remains absolutely constant whatever the change in load current. 2. It possesses zero internal resistance so that internal voltage drop in the source is zero. 3. Output voltage is provided by the source would remain constant irrespective of the amount of current drawn from it. 4. Output voltage provided by the source varies with the amount of current drawn from it.
Various measurements are made on an NMOS amplifier for which the drain resistor RD is 20 kΩ. First, DC measurements show the voltage across the drain resistor, VRD, to be 2 V and the gate-to-source bias voltage to be 1.2 V. Then, ac measurements with small signals show the voltage gain to be −10 V/V. What is the value of Vt for this transistor?
Various measurements are made on an NMOS amplifier for which the drain resistor RD is 20 kΩ. First, DC measurements show the voltage across the drain resistor, VRD, to be 2 V and the gate-to-source bias voltage to be 1.2 V. Then, ac measurements with small signals show the voltage gain to be −10 V/V. If the process transconductance parameter is 50μA/V2, what is the MOSFET’s W/L?
If source resistance in an amplifier circuit is zero, then voltage gain (output to input voltage ratio) and source voltage gain (output to source voltage ratio) are the same.
Find the current through gate if the FET was given with gate to source voltage =10V and drain to source voltage =20V, the pinch off voltage was -2V and ID=2mA.
What are the steps required in sequence to solve a circuit using superposition theorem? (a) Select any one source and short circuit all other voltage sources. (b) Find out the current or voltage across the required element, due to the source under consideration. (c) Open all current sources, if the internal impedance is not known. If known replace them by their impedances. (d) Add all the individual effects produced by individual sources to obtain the total current in or across the voltage element. Code :