Bissoy.com
Doctors Medicines MCQs Q&A

For an emitter feedback bias circuit, RC is 10Kohm, Re= 5Kohm, RB = 1Kohm, If IC = 1mA, current gain is _________________

For an emitter feedback bias circuit, RC is 10Kohm, Re= 5Kohm, RB = 1Kohm, If IC = 1mA, current gain is _________________ Correct Answer 2

For emitter feedback bias circuit, current gain=RC/RE There will be a change in phase of 180 degrees, current gain=10Kohm/5Kohm=2 Hence while designing an amplifier circuit depending on the gain value, the resistors RC and Re can be selected.

Related Questions

For an emitter feedback bias circuit, the value of VCC = 10V, RB = 10Kohm, RE=1Kohm and RC=2Kohm, if current flowing through collector is 0.5mA, what is the voltage difference between collector and emitter?
For an emitter feedback bias Circuit having, RE=1Kohm, RC= 4.7Kohm, IB=0.005mA, IE = 1mA, VCC = 12V and Vce = 5V. Find the value of beta.
Which of the following conditions must be satisfied for a transistor to be in saturation? 1. Its collector to base junction should be under forward bias 2. Its collector to base junction should be under reverse bias 3. Its emitter to base junction should be under reverse bias 4. Its emitter to base junction should be under forward bias Which of the above conditions are correct?
A transistor is used in common emitter mode as an amplifier. Then a. The base-emitter junction is forward biased b. The base-emitter junction is reverse biased  c. The input signal is connected in series with the voltage applied to the base-emitter junction  d. The input signal is connected in series with the voltage applied to bias the base-collector junction Which of the following statement is true?
Consider the following statements with respect to the feedback from the control systems: 1. The feedback can improve stability or be harmful to stability if it is not properly applied. 2. The feedback can always improve stability. 3. In many situations, the feedback can reduce the effect of noise and disturbance on system performance. 4. In general, the sensitivity of the system gain of a feedback system of a parameter variation depends on where the parameter is located. Select the correct statements.
Consider the following statements with respect to the feedback of the control systems. i. Feedback can improve stability or be harmful to stability if it is not properly applied. ii. Feedback can always improve stability iii. In many situations the feedback can reduce the effect of noise and disturbance on system performance. iv. In general the sensitivity of the system gain of a feedback system of a parameter variation depends on where the parameter is located.
Consider the following statements with respect to the feedback of the control systems: 1. Feedback can improve stability or be harmful to stability if it is not properly applied. 2. Feedback can always improve stability 3. In many situations the feedback can reduce the effect of noise and disturbance on system performance. 4. In general the sensitivity of the system gain of a feedback system of a parameter variation depends on where the parameter is located.
Consider the circuit shown below which reduces the impact of the input bias current. If IB1 = IB2 = Input bias current, then determine the value of R3 so that the output voltage (v0) is not impacted by the input bias current.
Consider the circuit shown below. Consider A: Current-shunt feedback B: Current-series feedback C: Voltage-shunt feedback D: Voltage-series feedback Which of the above are present?
If CT is the transition capacitance, which of the following are true? 1) in forward bias, CT dominates 2) in reverse bias, CT dominates 3) in forward bias, diffusion capacitance dominates 4) in reverse bias, diffusion capacitance dominates