Bissoy.com
Doctors Medicines MCQs Q&A

A permanent magnet moving coil ammeter has a coil resistance of 99ohm and Full Scale DeflectionFSD. current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is

A permanent magnet moving coil ammeter has a coil resistance of 99ohm and Full Scale DeflectionFSD. current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is Correct Answer 0.05mA

Related Questions

The interaction expression for stiffeners subjected to external loads or moments is given by +(Fs/Fsd)+(Mq/Myq) < 1 b) +(Fs/Fsd)+(Mq/Myq) > 1 c) -(Fs/Fsd)-(Mq/Myq) < 1 d) -(Fs/Fsd)-(Mq/Myq) > 1
The figure below shows a circuit for an AC voltmeter. It utilizes a moving-coil meter that gives a full-scale reading when the average current flowing through it is 1 mA. The moving-coil meter has a 50-Ω resistance. The value of R that results in the meter indicating a full-scale reading when the input sine-wave voltage VI is 20 V peak-to-peak is
A resistance R is measured using the connection shown in the below figure. The current measured is 10 A on ranges 100A and the voltage measured is 125 V on 150 V range. The scales of the ammeter and voltmeter are uniform. The total number of scale divisions of the ammeter is 100 and that of the voltmeter is 150. The scale division can be distinguished. The constructional error of the ammeter is ± 0.3% and that of voltmeter±0.4%. The resistance of the ammeter is 0.25 Ω. The possible error in the measurement of R is?
You have a 2 milliampere meter movement with a coil resistance of 1000 ohms. When 2 milliampere is flowing through the meter coil and is causing FSD, what will be the voltage developed across the coil resistance?
A moving coil instrument has a resistance of 70 Ω and gives full scale deflection of 100 scale divisions for a current of 1 mA. The instrument is connected in parallel with a shunt of 30 Ω resistance and this combination is then connected in series with a load and supply. Determine the current in the load when the instrument gives an indication of 80 scale divisions.
The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100 ohms. If this meter is to have full deflection at 5A, what is the value of the shunt resistance to be used?
A 100KW, 250 V, 400 A, a long shunt compound generator has an armature resistance of 0.025 ohms. There are 1000 shunt fields turns per pole and 3 series field turns per pole. The series field is connected in a such a fashion that positive armature current produces direct-axis MMF which adds to that of the shunt field. Compute the gross MMF at the rated terminal current when shunt field current is 4.7A and speed is 1150 rpm.
A teacher asks students to suggest a method to demagnetise a magnet. Some responses are: A) "dropping a magnet on floor several times" B) "breaking the magnet into 2 halves" C) "heating the magnet" D) "throwing the magnet in water" E) "by hammering it" Which of the following are correct?
When is a ceramic magnet used as a permanent magnet in a permanent magnet DC motor?
A moving-coil permanent-magnet instrument can be used as _____ by using a low resistance shunt.