Bissoy.com
Doctors Medicines MCQs Q&A

Avalanche breakdown in zener diode is ______

Avalanche breakdown in zener diode is ______ Correct Answer electric current multiplication takes place

The carriers in transition region are accelerated by electric field to energies. That energies are sufficient to create electron current multiplication. A single carrier that is energized will collide with another by gaining energy. Thus an avalanche multiplication takes place.

Related Questions

In the Zener controlled series regulator shown below, find the current through the Zener diode. Given that the Zener diode breakdown voltage is 5V, the source voltage is 15V, the output voltage is 10V, R4 = 2kΩ, β=99, R1=2kΩ.
For a Zener diode shunt regulator, the source current is IS, the Zener diode current is IZ and the load current is IL. The source voltage is VS, Zener voltage is VZ and load voltage is VL. The load resistance is RL. What is the correct option for the safe operation of the diode?
A Zener regulator has to handle supply voltage variation from 19.5V to 22.5V. Find the magnitude of regulating resistance, if the load resistance is 6KΩ. The Zener diode has the following specifications: breakdown voltage =18V, (IZ)Min=2µA, maximum power dissipation=60mW and Zener resistance =20Ω.
Which among the given statement is/are CORRECT? (a) Avalanche breakdown voltage increases with temperature (b) Zener breakdown voltage decreases with temperature
Partial specifications of a Zener diode is provided. VZ = 10.0 V, VZK = 9.6 V, and IZT = 50 mA. Assuming that the power rating of a breakdown diode is established at about twice the specified Zener current (IZT), what is the power rating of each of the diodes described above?
For the zener diode shown in the figure, the zener voltage at knee is 7V, the knee current is negligible and the zener dynamic resistance is 10Ω. If the input voltage (Vi) ranges from 10 to 16 volts, the output voltage (Vo) ranges from?
A basic op-amp circuit has a zener and rectifier diode connected in the feedback path. Calculate the maximum positive voltage. Where, zener voltage = 5.1 v and voltage drop across the forward biased zener = 0.7v?
The following is a shunt regulator. Find maximum power dissipation of the Zener diode and transistor, given that the source voltage varies from 20-40V, the Zener breakdown voltage is 5V, the output voltage is 10V, the resistance R1=50Ω, R2=20kΩ, β=99, VBE=0.5V.
Suppose the zener diode has a breakdown voltage of 10 V and zener resistance of 8.5 W, what is the additional voltage when the current is 20 mA?
Which of the following statement is true regarding avalanche and Zener breakdown?