Bissoy.com
Doctors Medicines MCQs Q&A

What will be the instantaneous stress produced in a bar 10cm2 in area ans 4m long by the sudden application of tensile load of unknown magnitude, if the extension of the bar due to suddenly applied load is 1.35mm if E = 2×105 N/mm2?

What will be the instantaneous stress produced in a bar 10cm2 in area ans 4m long by the sudden application of tensile load of unknown magnitude, if the extension of the bar due to suddenly applied load is 1.35mm if E = 2×105 N/mm2? Correct Answer 67.5 N/mm2

The value of stress = load / area where area is 10cm2 and load can be calculated by stress strain equation.

Related Questions

The maximum instantaneous extension, produced by an unknown falling weight through a height of 4cm in a vertical bar of length 3m and of cross section area 5cm2. what will be the instantaneous stress induced in the vertical bar and the value of unknown weight if E = 200GPa?
The maximum instantaneous extension, produced by an unknown falling weight in a vertical bar of length 3m. what will be the instantaneous stress induced in the vertical bar and the value of unknown weight if E = 200GPa?
A uniform bar has a cross sectional area of 700mm and a length of 1.5m. if the stress at the elastic limit is 160 N/mm, what will be the value of gradually applied load which will produce the same extension as that produced by the suddenly applied load above?
A tensile load of 60kN is gradually applied to a circular bar of 4cm diameter and 5m long. What is the strain energy in the rod if the load is applied suddenly (E = 2×105 N/mm2)?
A tensile load of 100kN is suddenly applied to a rectangular bar of dimension 2cmx4cm. What will be the instantaneous stress in bar?
A tensile load of 60kN is suddenly applied to a circular bar of 4cm diameter. What will be the maximum instantaneous stress induced?
2 tensile load of 100kN is suddenly applied to a rectangular bar of dimension 2cmx4cm and length of 5m. What will be the strain energy absorbed in the bar if E=1×105 N/mm2?
The stress in the bar when the load is applied suddenly is __________ as compared to the stress induced due to gradually applied loads.
A load of 100N falls through a height of 2cm onto a collar rigidly attached to the lower end of a vertical bar 1.5m long and of 105cm2 cross- sectional area. The upper end of the vertical bar is fixed. What is the maximum instantaneous stress induced in the vertical bar if E = 200GPa?
Calculate ultimate moment and shear of effective span is 30m, live load is 9kn/m, dead load excluding self weight is 2kn/m, load factors for dead load is 1.4 for live load is 1.6 cube strength of concrete fcu is 50n/mm2 cube strength at transfer is fci is 35n/mm2, tensile strength of concrete Ec is 34kn/mm2 loss ratio ɳ is 0.85 and 8mm diameter high tensile strength fpu is 1500n/mm2 are available for use and the modulus of elasticity of high tensile wires is 200kn/mm2?