Bissoy.com
Doctors Medicines MCQs Q&A

A uniform bar has a cross sectional area of 700mm and a length of 1.5m. if the stress at the elastic limit is 160 N/mm, what will be the value of gradually applied load which will produce the same extension as that produced by the suddenly applied load above?

A uniform bar has a cross sectional area of 700mm and a length of 1.5m. if the stress at the elastic limit is 160 N/mm, what will be the value of gradually applied load which will produce the same extension as that produced by the suddenly applied load above? Correct Answer 112kN

For gradually applied load, stress = load / area Load = stress x area = 160 x 700 = 112000 N = 112kN.

Related Questions

In the gate area for non-pressurized casting gating ratio a:b:c? (gating ratio = a: b: c where, a = cross-sectional area of sprue, b: cross-sectional area of runner, c = total cross-sectional area of ingates).
If an axial force N is applied gradually to a bar which is linear elastic and has a constant cross sectional area A and length L, what will be the value of Ui ?
What will be the instantaneous stress produced in a bar 10cm2 in area ans 4m long by the sudden application of tensile load of unknown magnitude, if the extension of the bar due to suddenly applied load is 1.35mm if E = 2×105 N/mm2?
A tension bar 6m long is made up of two parts, 4m of its length has cross sectional area of 12.5cm while the remaining 2m has 25cm. An axial load 5tonnes is gradually applied. What will be the total strain energy produced if E = 2 x 106 kgf/cm2?
If an axial force N is applied gradually to a bar which is linear elastic and has a constant cross sectional area A and length L, what will be Δ?
When a load W is applied suddenly on a bar of cross-sectional area A, the stress induced in the bar will be
What will be the cross-sectional area in mm2 of the prismatical bar of length 5 mm and weight per unit volume of bar is 5 N/mm3 and self weight of the bar is 50 N Where working stress is 50 MPa and ultimate stress is 100 MPa.
Consider the following statements: 1. Cross-section of a member of truss experiences uniform stress 2. Cross-section of a beam experiences minimum stress 3. Cross-section of a beam experiences linearly varying stress 4. Cross-sections of truss members experience only compressive stress Which of the above statements are correct?
Two wires have the same material and have the same volume. However wire 1 had cross sectional area A and wire 2 has cross sectional area 3A. If the length of wire 1 increases by ∆x on applying force F, how much force is needed to stretch wire 2 by the same amount?
The stress in the bar when the load is applied suddenly is __________ as compared to the stress induced due to gradually applied loads.