A tensile load of 60kN is gradually applied to a circular bar of 4cm diameter and 5m long. What is the strain energy in the rod if the load is applied suddenly (E = 2×105 N/mm2)?

A tensile load of 60kN is gradually applied to a circular bar of 4cm diameter and 10m long. What will be the strain energy absorbed by the rod if E=1×105 N/mm2?

A

100 N-m

B

132 N-m

C

148 N-m

D

143.2 N-m

A tensile load of 60kN is suddenly applied to a circular bar of 4cm and 5m length. What will be the strain energy absorbed by the rod if E=2×105 N/mm2?

A

140.5 N-m

B

100 N-m

C

197.45 N-m

D

143.2 N-m

A tensile load of 60kN is gradually applied to a circular bar of 4cm diameter and 5m long. What is the stretch in the rod if E = 2×105 N/mm2?

A

1.1mm

B

1.24mm

C

2mm

D

1.19mm

A tensile load of 60kN is gradually applied to a circular bar of 4cm diameter and 5cm long. What will be the stress in the rod if E=1×105 N/mm2?

A

47.746 N/mm2

B

34.15 N/mm2

C

48.456 N/mm2

D

71.02 N/mm2

A tensile load of 60kN is gradually applied to a circular bar of 4cm diameter and 10m long. What will be the stress in the rod if E=1×105 N/mm2?

A

1.19mm

B

2.14mm

C

3.45mm

D

4.77mm

A tensile load of 60kN is suddenly applied to a circular bar of 4cm diameter. What will be the maximum instantaneous stress induced?

A

95.493 N/mm2

B

45.25 N/mm2

C

85.64 N/mm2

D

102.45 N/mm2

A tensile rod of 40kN is acting on a rod of diameter 40mm and of length 4m. a bore of diameter 20mm is made centrally on the rod. To what length the rod should be bored so that the total extension will increase 30% under the same tensile load if E = 2×105 N/mm2?

A

2m

B

2.7m

C

3.2m

D

3.6m

A hollow rod has frictionless inner walls. Inside the rod are two small spheres that are kept on either side of the centre of rod. The rod is rotated about its central axis which is perpendicular to the plane of rotation. If the rod had been rotated by an impulsive torque which gave it an instantaneous angular velocity of 5rad/s, what will be the angular velocity after some finite but long time ‘t’? Assume no external forces act on rod after the impulse. Also state what will happen to the spheres in the centre of the rod. The rod has a mass =2kg & length =10cm. The two spheres have a mass =1kg each.

A

2.5 rad/s, spheres will stay where they are as there is no friction to move them

B

0 rad/s, spheres will move outwards and decrease velocity of rod to zero

C

1.25 rad/s, spheres will move to opposite ends of rod

D

2.5 rad/s, spheres will move to opposite ends of rod

A tensile load of 50kN is gradually applied to a circular bar of 5cm diameter and 5m long. What is the strain energy absorbed by the rod (E = 200GP

A

? ] 14 N-m

B

15.9 N-mm

C

15.9 N-m

D

14 N-mm

A tensile load of 100kN is gradually applied to a rectangular bar of dimension 2cmx4cm and length of 5m. What will be the strain energy in the bar if E=1×105 N/mm2?

A

312.5 N-m

B

314500 N-mm

C

245.5 N-m

D

634 N-m

A tensile load of 60kN is gradually applied to a circular bar of 4cm diameter and 5m long. What is the strain energy in the rod if the load is applied suddenly (E = 2×105 N/mm2)?

Related Questions