Tearing of the plate between the edges of the plate and rivet-hole takes place when ____________

Tearing of the plate between the edges of the plate and rivet-hole takes place when ____________ Correct Answer the hole is too near the edge

Tearing of the plate between the edges of the plate and rivet-hole takes place if the hole is too near the edge. Tearing of the plate between the holes takes place if they are very near to each other.
Bissoy MCQ

Related Questions

Consider the following statements.
1. When evaporation takes place, cooling takes place.
2. Evaporation takes place at all temperature, boiling takes place only at the boiling point.
3. Evaporation is a surface phenomenon.
Which of the statements given above is/are true?
Tearing resistance required to tear off the plate per pitch length is (where p = Pitch of rivets, d = Dia. of rivet hole and $${\sigma _{\text{t}}}$$ = Permissible tensile stress for plate material)
In order to avoid tearing of the plate at edge, the distance from the center line of the rivet hole to the nearest edge of the plate in terms of dia. of rivet d should be equal to
To avoid the tearing off the plate of an edge, the margin (i.e., the minimum distance from the centre of the rivet hole to the nearest edge of the plate) should be equal to
In order to avoid tearing of the plate at an edge, the distance from the centre line of the rivet hole to the nearest edge of the plate should be equal to (where d = Diameter of rivet hole)
In order to avoid tearing off the plate at an edge, the distance from the center of the rivet hole to the nearest edge of the plate (i.e. margin) should be (where d = Diameter of rivet hole in mm)
Mrs. Carson took a taxi to meet her three friends for lunch. They were waiting for her outside the restaurant when she pulled up in the car. She was so excited to see her friends that she left her tote bag in the taxi. As the taxi pulled away, she and her friends took notice of the license plate number so they would be able to identify the car when they called the taxi company.

#1 : The four women seem to agree that the plate starts out with the letter J.
#2 : Three of them agree that the plate ends with 12L.
#3 : Three of them think that the second letter is X, and a different three think that the third letter is K.

The four license plate numbers below represent what each of the four women thinks she saw. Which one is most likely the license plate number of the taxi?
Tearing of the plate between the holes is taken when ________________________
The elastic buckling stress of thin flat plate of length L, depth d and thickness t simply supported along four edges and loaded by shear stresses distributed uniformly along its edges is given by . b) fcr = kπ2E / . c) fcr = kπ2E / . d) fcr = kπ2E / .
In a public bathroom there are n taps 1,2,3...n. Tap1 and Tap2 take equal time to fill the tank while Tap3 takes half the time taken by Tap2 and Tap4 takes half the time taken by Tap3. Similarly each next number of tap takes half the time taken by previous number of Tap i.e, K-th Tap takes half the time taken by (K-1)th Tap.If the 10th tap takes 2 hours to fill the tank alone then what is the ratio of efficiency of 8th tap and 12th tap, respectively?