The collector to emitter voltage (VCE) is obtained by_________

The collector to emitter voltage (VCE) is obtained by_________ Correct Answer VCC – RC(IC+IB)

The collector to emitter voltage is obtained in order to find the operating point of a transistor. It is taken when there is no signal applied to the transistor. The point thus obtained lies in the cut off region when the transistor is used as a switch.
Bissoy MCQ

Related Questions

Choose the right option among the alternatives – A transistor conducts in its forward direction when its collector/emitter/base, is positive with respect to its collector/emitter/base, and when a turn-on voltage or current signal is applied to its collector/emitter/base.
For an emitter feedback bias circuit, the value of VCC = 10V, RB = 10Kohm, RE=1Kohm and RC=2Kohm, if current flowing through collector is 0.5mA, what is the voltage difference between collector and emitter?
Given that the collector power dissipation is 300 mW, what is the value of collector current for the collector to emitter voltage = 12 V?
Given that the collector power dissipation is 300 mW, what is the value of collector to emitter voltage for collector current = 50 mA?
The collector supply voltage for a CE configured transistor is 10V. The resistance RL=800Ω. The voltage drop across RL is 0.8V. Find the value of collector emitter voltage.
In the circuit, transistor has β =60, VBE=0.7V. Find the collector to emitter voltage drop VCE.
Given collector resistance = 2kΩ, load resistance = 5kΩ, collector capacitance = 1μF, emitter capacitance = 20μF, collector current = 2mA, source resistance = 2kΩ. If the effect of blocking capacitor is ignored, find the applicable cut-off frequency.
A transistor is connected in CB configuration. The emitter voltage is changed by 200mV, the emitter by 5mA. During this transition the collector base voltage is kept constant. What is the input dynamic resistance?
The total thermal resistance of a power transistor and heat sink is 20°C/W. The ambient temperature is 25°C and (TJ)MAX=200°C. If VCE=4V, find the maximum collector current that the transistor can carry without destruction. What will be the allowed value of collector current if ambient temperature rises to 75°C?
When the β value is large for a given transistor, the IC and VCE values are given by_________