Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

For the given circuit, what is the minimum peak value of the output waveform if the input waveform is 10V square wave with switching time of 1 second? Assume that the input switches between +10V and -10V DC levels.
If peak voltage of a carrier wave is 10V, what is the peak voltage of modulating signal if modulation index is 50%?
If the peak voltage is 9V, calculate the peak to peak voltage.
একটি JFET-এর IDSS = 10V, VGS = 10V হলে Input resistance কত?
Consider a square wave having a peak to peak amplitude of 275mv and it is amplified to a peak to peak amplitude of 4v, with rise time of 5.2µs. Calculate the slew rate?
The collector supply voltage for a CE configured transistor is 10V. The resistance RL=800Ω. The voltage drop across RL is 0.8V. Find the value of collector emitter voltage.
A cosine wave voltage signal has a 10V RMS value and 60Hz frequency. Also at time, t=0, the value of the voltage signal is equal to its RMS value. Which of the following is the correct mathematical representation of the voltage signal?
Find the current through gate if the FET was given with gate to source voltage =10V and drain to source voltage =20V, the pinch off voltage was -2V and ID=2mA.
In the Zener controlled series regulator shown below, find the current through the Zener diode. Given that the Zener diode breakdown voltage is 5V, the source voltage is 15V, the output voltage is 10V, R4 = 2kΩ, β=99, R1=2kΩ.
The following is a shunt regulator. Find maximum power dissipation of the Zener diode and transistor, given that the source voltage varies from 20-40V, the Zener breakdown voltage is 5V, the output voltage is 10V, the resistance R1=50Ω, R2=20kΩ, β=99, VBE=0.5V.