Transistors MCQ
Test your knowledge with important Transistors MCQ and their applications. These MCQs are beneficial for competitive exams too. Explore 30+ more Transistors MCQs on Bissoy. Bissoy App
-
In a particular biasing circuit, the value of RE is about
-
Thermal runaway occurs when ___________
-
For proper operation of the transistor, its collector should have ___________
-
The zero signal IC is generally ___________ mA in the initial stages of a transistor amplifier
-
In parallel resonance, there is ___________
-
In series resonance, there is ___________
-
The voltage gain of a tuned amplifier is ___________ at resonant frequency
-
The disadvantage of voltage divider bias is that it has ___________
-
If biasing is not done in an amplifier circuit, it results in ___________
-
At series resonance, the net reactive component of circuit current is ___________
-
At parallel resonance, the net reactive component circuit current is ___________
-
At parallel resonance, the line current is ___________
-
At series resonance, the phase angle between applied voltage and circuit is ___________
-
For faithful amplification by a transistor circuit, the value of VCE should ___________ for silicon transistor
-
The point of intersection of d.c. and a.c. load lines represents ___________
-
Operating point represents ___________
-
The circuit that provides the best stabilization of operating point is ___________
-
The Q of a tuned circuit refers to the property of ___________
-
The current IB is ___________
-
At the base emitter junctions of a transistor, one finds ___________
-
In a parallel LC circuit, if the input signal frequency is increased above resonant frequency then ___________
-
The operating point ___________ on the a.c. load line
-
In the design of a biasing circuit, the value of collector load RC is determined by ___________
-
The operating point is also called the ___________
-
For germanium transistor amplifier, VCE should ___________ for faithful amplification
-
A heat sink is generally used with a transistor to ___________
-
The most commonly used semiconductor in the manufacture of a transistor is ___________
-
The output impedance of a transistor is ___________
-
The value of a of a transistor is ___________
-
The input impedance of a transistor is ___________