Bissoy.com
Doctors Medicines MCQs Q&A

Bolt heads are manufactured by

Bolt heads are manufactured by Correct Answer Upset forging

Forging is a process in which material is shaped by the application of localized compressive forces exerted manually or with power hammers, presses or special forging machines. The process may be carried out on materials in either hot or cold state.

Forging is an effective method for producing many useful shapes. The process is generally used to produce discrete parts. Typical forged parts include rivets, bolts, crane hooks, connecting rods, gears, turbine shafts, hand tools, railroads, and a variety of structural components used to manufacture machinery. The forged parts have good strength and toughness; they can be used reliably for highly stressed and critical applications.

Upset forging involves increasing the cross-section of material at the expense of its corresponding length. Examples of upset forged parts are fasteners, valves, nails, and couplings.

An upset forging operation is used to form a head on a bolt.

[ alt="RRB JE ME 5 11Q 26thAug 2015 Shift1 Hindi images Q5" src="//storage.googleapis.com/tb-img/production/19/02/RRB_JE_ME_5_11Q_26thAug_2015_Shift1_Hindi_images_Q5.PNG" style="width: 490px; height: 311px;">

Related Questions

The pic chart given below shows the number of bulbs manufactured by a company in 6 years. The number of bulbs manufactured in a particular years is shows as a percentage of total number of bulbs manufactured in 6 years. If the total number of bulbs manufactured in 6 years is 100000, then what is the difference in the number of bulbs manufactured in year Y3 and Y5?
Consider the following statements regarding typical analysis of bolt failure :  1. 15% failure of bolt occur at the fillet under the head. 2. 50% failure of bolt occur at the end of threads on the shank. 3. 80% failure of bolt occur in the threads that are in contact with the nut. Which of the above statements is/are correct ?
Nominal bearing strength of bolt is 2.5kbdtfu where kb depends on (i) end distance, (ii)pitch distance, (iii)ultimate tensile stress of bolt, (iv)shank area of bolt, (v)yield stress of bolt, (vi)diameter of hole
Which of the following stresses are associated with the tightening of a nut on a bolt? P. Tensile stress due to the streching of bolt Q. Bending stress due to the bending of bolt R. Torsional shear stress due to frictional resistance between the nut and the bolt Select the correct answer using the codes given below.
A wall bracket is attached to the wall by means of 2 identical bolts, one at A and one at B. The force of 20kN acts at a distance of 400mm. Bolt A lies at a distance of 50mm from axis of tilt and bolt B 500mm. Allowable shear stress in the bolts is 100N/mm² and tensile is 40N/mm². Find the radius of Mohr circle which can be made from the shear stress and tensile stress acting on bolts.(Consider bolt under max stress and area of bolt is A)
The table given below shows the number of cars manufactured by 7 different companies in a month. Companies Number of Cars C1 2600 C2 3200 C3 4200 C4 1800 C5 2200 C6 2800 C7 3500 Which of the following statement(s) is/are correct? I. Ratio of number of cars manufactured by company C4 to the number of cars manufactured by company C6 is 9 : 14 respectively. Il. Average number of cars manufactured by per company is 2900. 
The bar graph given below shows the total number of cars manufactured by two companies A and B for the 5 given years. J1 = Difference between the total number of cars manufactured by company A and the total number of cars manufactured by company B in all five years together J2 = Average number of cars manufactured per year by company A for the given period What is the value of J2 – J1?
The different numbers of cars manufactured by a different company in a month. This is shown by the pictograph given below. Name of the company Number of cars manufactured Hyundai Toyota Mahindra Tata motors Maruti Suzuki 1  represents 1000 cars How much percentage of Maruti Suzuki car manufactured is more than Hyundai car manufactured?
Pitch of the given bolt is 10 mm. The bolt completed the ½ revolution in the forward direction. How much the bolt advances through axis?
Which of the following stresses are associated with the tightening of a nut on a bolt? P. Crushing and shear stress in threads Q. Bending stress due to the bending of bolt R. Torsional shear stress due to frictional resistance between the nut and the bolt Select the correct answer using the codes given below: