Bissoy.com
Doctors Medicines MCQs Q&A

A hydraulic jump is generally formed when a stream moving with

A hydraulic jump is generally formed when a stream moving with Correct Answer A hyper-critical velocity meets a stream moving with a sub-critical velocity

Related Questions

Which of the following statements are true with regard to energy dissipation below a dam? (i) If the upper conjugate depth of a hydraulic jump is below the tailwater, little energy will be dissipated (ii) An upturned bucket will protect the dam from scour by moving material toward the dam. (iii) A secondary dam may increase tailwater height, thereby causing a hydraulic jump to form at the toe of the main dam. (v) A slopping apron above streambed level may be used to control the hydraulic jump so that it occurs on the apron. 
The fresh feed to an ammonia synthesis reactor contains nitrogen, hydrogen and 2.0 mole per cent inerts. The molar ratio of H2:N2 is 3:1. The product stream consists of pure ammonia. Since conversion in the reactor is only 15%, a recycle stream is used and in order to avoid build-up of inerts, a purge stream is withdrawn. The rate of purge stream is adjusted to keep inert concentration in the recycle stream at 8 mole per cent. For a fresh feed rate of 100 moles/hr. Note that recycle stream contains only nitrogen, hydrogen and inerts. The N2:H2 ratio of 1:3 is maintained in every process stream, and calculate the moles of nitrogen entering the reactor and in the recycle stream?
The fresh feed to an ammonia synthesis reactor contains nitrogen, hydrogen and 2.0 mole per cent inerts. The molar ratio of H2:N2 is 3:1. The product stream consists of pure ammonia. Since conversion in the reactor is only 15%, a recycle stream is used and in order to avoid build-up of inerts, a purge stream is withdrawn. The rate of purge stream is adjusted to keep inert concentration in the recycle stream at 8 mole per cent. For a fresh feed rate of 100 moles/hr. Note that recycle stream contains only nitrogen, hydrogen and inerts. The N2:H2 ratio of 1:3 is maintained in every process stream, and calculate the number of moles, moles of inerts and moles of hydrogen in the recycle stream?
Which of the following assumptions is/are made in the analysis of hydraulic jump? 1. It is assumed that before and after jump formation the flow is essentially two-dimensional and that the pressure distribution is hydrostatic. 2. The length of the jump is small so that the losses due to friction on the channel floor are small and hence neglected. 3. The channel floor is horizontal or the slope is so gentle that the weight component of the water mass comprising the jump is very high.
The fresh feed to an ammonia synthesis reactor contains nitrogen, hydrogen and 2.0 mole per cent inerts. The molar ratio of H2:N2 is 3:1. The product stream consists of pure ammonia. Since conversion in the reactor is only 15%, a recycle stream is used and in order to avoid build-up of inerts, a purge stream is withdrawn. The rate of purge stream is adjusted to keep inert concentration in the recycle stream at 8 mole per cent. For a fresh feed rate of 100 moles/hr. Note that recycle stream contains only nitrogen, hydrogen and inerts. The N2:H2 ratio of 1:3 is maintained in every process stream. Calculate the moles of ammonia produced.
The following question, there are three statements I, II and III. Read the question carefully and mark your answer according to which statements(s) is/are sufficient to the answer the question. What is the Speed of the stream? Statement I: The distance between two points A and B is a km and the boat cover 90km along the stream in 5 hours. Statement II: The distance travelled along the stream is four times the total distance and that against the stream is three times the total distance Statement III: The total time taken against the stream is 10% more than that along the stream
Rita has the longest jump of 3 m 40 cm. Tanu is second. Her jump is 20 cm less than Rita's. Rihanna comes third. Her jump is only 5 cm less than Tanu's jump. By how many centimetres Rihana could not secure the first rank?
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: Superman and Batman in their boat are moving towards each other If Superman travel against the stream and Batman along the stream they are at a distance of 2300 km from each other. If the Speed of Stream is 20 km/h and Speed of Superman’s Boat is 100 km/h and Speed of Batman’s Boat is 130 km/h. Find the Time Taken to meet each other Quantity B: Tony Stark is flying in his suit 1 hour before Captain America with the speed of 200 km/h. If Captain America is chasing him in the boat which runs at a speed of 270 km/h against a stream which has speed of 20 km/h. Find the time in which he catches the Tony Stark.
For which of the following conditions, the hydraulic jump formation will be perfect and it will be formed at the toe of the spillway at all discharges ? (where J. H. C.-Jump Height Curve              T. W. C.-Tail Water Curve)
In a horizontal rectangular channel, a hydraulic jump with a sequent depth ratio of 5.6 is formed. This jump can be classified as