Related Questions

A partial auxiliary view is used to show only the __________ in the auxiliary view.
A Projected inclined plane
B The projected top view
C The projected side view
D None of the above
A partial auxiliary view usually shows only features on the _________ of the inclined line and not any projection of other planes.
A Hidden lines
B Plane
C Center lines
D None of the above
This type of auxiliary view is projected onto a plane that is perpendicular to one of the principal planes of projection:
A Primary
B Secondary
C Revolved
D Successive
The offset distance for the width (front to back) distance of the auxiliary view is the same distance of the ________ in the top view.
A Width
B Height
C Length
D None of the above
The lines used to create the auxiliary view should appear as ________ in the finished view.
A Object lines
B Construction lines
C Reference lines
D Construction lines
For the given values of initial velocity of projection and angle of inclination of the plane, the maximum range for a projectile projected upwards will be obtained, if the angle of projection is
A $$\alpha = \frac{\pi }{4} - \frac{\beta }{2}$$
B $$\alpha = \frac{\pi }{2} + \frac{\beta }{2}$$
C $$\alpha = \frac{\beta }{2} - \frac{\pi }{2}$$
D $$\alpha = \frac{\pi }{4} - \frac{\beta }{4}$$
E $$\alpha = \frac{\pi }{2} - \frac{\beta }{2}$$
The range of projectile on a downward inclined plane is ________ the range on upward inclined plane for the same velocity of projection and angle of projection.
A Less than
B More than
C Equal to
D None of these
The Cartesian equation of trajectory is (where u = Velocity of projection, $$\alpha $$ = Angle of projection and x, y = Co-ordinates of any point on the trajectory after t seconds.)
A $${\text{y}} = \frac{{{\text{g}}{{\text{x}}^2}}}{{2{{\text{u}}^2}{{\cos }^2}\alpha }} + {\text{x}}\tan \alpha $$
B $${\text{y}} = \frac{{{\text{g}}{{\text{x}}^2}}}{{2{{\text{u}}^2}{{\cos }^2}\alpha }} - {\text{x}}\tan \alpha $$
C $${\text{y}} = {\text{x}}\tan \alpha - \frac{{{\text{g}}{{\text{x}}^2}}}{{2{{\text{u}}^2}{{\cos }^2}\alpha }}$$
D $${\text{y}} = {\text{x}}\tan \alpha + \frac{{{\text{g}}{{\text{x}}^2}}}{{2{{\text{u}}^2}{{\cos }^2}\alpha }}$$
The angle of projection for a range is equal to the distance through which the particle would have fallen in order to acquire a velocity equal to the velocity of projection, will be
A [[[
In this type of auxiliary view, a break line is used to indicate the imaginary break in the views:
A Primary
B Secondary
C Revolved
D Partial

Next steps