Related Questions

When a beam is subjected to a bending moment, the strain in a layer is __________ the distance from the neutral axis.
A Equal to
B Directly proportional to
C Inversely proportional to
D Independent of
In a beam subjected to pure bending, the intensity of stress in any fibre is _________ the distance of the fibre from the neutral axis.
A Equal to
B Less than
C More than
D Directly proportional to
A shaft of diameter D is subjected to a twisting moment (T) and a bending moment (M). If the maximum bending stress is equal to maximum shear stress developed, then M is equal to
A $$\frac{{\text{T}}}{2}$$
B T
C 2T
D 4T
If the depth of actual neutral axis in a beam is more than the depth of critical neutral axis, then the beam is called
A Balanced beam
B Under reinforced beam
C Over reinforced beam
D None of the above
A shaft is subjected to bending moment M and a torque T simultaneously. The ratio of the maximum bending stress to maximum shear stress developed in the shaft, is
A $$\frac{{\text{M}}}{{\text{T}}}$$
B $$\frac{{\text{T}}}{{\text{M}}}$$
C $$\frac{{2{\text{M}}}}{{\text{T}}}$$
D $$\frac{{2{\text{T}}}}{{\text{M}}}$$
The neutral axis of the cross-section a beam is that axis at which the bending stress is
A Zero
B Minimum
C Maximum
D Infinity
The neutral axis of the cross-section of a beam is that axis at which the bending stress is
A Zero
B Minimum
C Maximum
D Infinity
‘P’ is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is ‘A’ and sectional modulus is ‘Z’. The minimum stress ‘f’ on the beam subjected to a maximum bending moment ‘M’ is
A $${\text{f}} = \frac{{\text{P}}}{{\text{A}}} - \frac{{\text{Z}}}{{\text{M}}}$$
B $${\text{f}} = \frac{{\text{A}}}{{\text{P}}} - \frac{{\text{M}}}{{\text{Z}}}$$
C $${\text{f}} = \frac{{\text{P}}}{{\text{A}}} - \frac{{\text{M}}}{{\text{Z}}}$$
D $${\text{f}} = \frac{{\text{P}}}{{\text{A}}} - \frac{{\text{M}}}{{6{\text{Z}}}}$$
‘P’ is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is ‘A’ and sectional modulus is ‘Z’. The maximum stress ‘f’ in the beam, subjected to a maximum bending moment ‘M’, is
A $${\text{f}} = \frac{{\text{P}}}{{\text{A}}} - \frac{{\text{Z}}}{{\text{M}}}$$
B $${\text{f}} = \frac{{\text{A}}}{{\text{P}}} - \frac{{\text{M}}}{{\text{Z}}}$$
C $${\text{f}} = \frac{{\text{P}}}{{\text{A}}} - \frac{{\text{M}}}{{\text{Z}}}$$
D $${\text{f}} = \frac{{\text{P}}}{{\text{A}}} - \frac{{\text{M}}}{{6{\text{Z}}}}$$
The bending moment at a section tends to bend or deflect the beam and the internal stresses resist its bending. The resistance offered by the internal stresses, to the bending, is called
A Compressive stress
B Shear stress
C Bending stress
D Elastic modulus

Next steps