Related Questions

A shaft of diameter D is subjected to a twisting moment (T) and a bending moment (M). If the maximum bending stress is equal to maximum shear stress developed, then M is equal to
A $$\frac{{\text{T}}}{2}$$
B T
C 2T
D 4T
The bending moment ‘M’ and a torque ‘T’ is applied on a solid circular shaft. If the maximum bending stress equals to maximum shear stress developed, then ‘M’ is equal to
A $$\frac{{\text{T}}}{2}$$
B 1T
C 2T
D 4T
When a shaft is subjected to combined twisting moment (T) and bending moment (M), then the equivalent twisting moment is equal to
A $$\frac{1}{2}\sqrt {{{\text{M}}^2} + {{\text{T}}^2}} $$
B $$\sqrt {{{\text{M}}^2} + {{\text{T}}^2}} $$
C $$\frac{1}{2}\left( {{\text{M}} + \sqrt {{{\text{M}}^2} + {{\text{T}}^2}} } \right)$$
D $${\text{M}} + \sqrt {{{\text{M}}^2} + {{\text{T}}^2}} $$
A shaft subjected to a bending moment M and a torque T, experiences
A Maximum bending stress $$ = \frac{{32{\text{M}}}}{{\pi {{\text{d}}^3}}}$$
B Maximum shear stress $$ = \frac{{16{\text{T}}}}{{\pi {{\text{d}}^3}}}$$
C Both A and B
D Neither A nor B
When a body is subjected to biaxial stress i.e. direct stresses ($${\sigma _{\text{x}}}$$) and ($${\sigma _{\text{y}}}$$) in two mutually perpendicular planes accompanied by a simple shear stress ($${\tau _{{\text{xy}}}}$$ ), then maximum shear stress is
A $$\frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} - {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$
B $$\frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} + {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$
C $$\sqrt {{{\left( {{\sigma _{\text{x}}} - {\sigma _{\text{y}}}} \right)}^2} + \tau _{{\text{xy}}}^2} $$
D $$\sqrt {{{\left( {{\sigma _{\text{x}}} + {\sigma _{\text{y}}}} \right)}^2} + \tau _{{\text{xy}}}^2} $$
When a body is subjected to a direct tensile stress ($${\sigma _{\text{x}}}$$) in one plane accompanied by a simple shear stress ($${\tau _{{\text{xy}}}}$$ ), the maximum shear stress is
A $$\frac{{{\sigma _{\text{x}}}}}{2} + \frac{1}{2}\sqrt {\sigma _{\text{x}}^2 + 4\tau _{{\text{xy}}}^2} $$
B $$\frac{{{\sigma _{\text{x}}}}}{2} - \frac{1}{2}\sqrt {\sigma _{\text{x}}^2 + 4\tau _{{\text{xy}}}^2} $$
C $$\frac{{{\sigma _{\text{x}}}}}{2} + \frac{1}{2}\sqrt {\sigma _{\text{x}}^2 - 4\tau _{{\text{xy}}}^2} $$
D $$\frac{1}{2}\sqrt {\sigma _{\text{x}}^2 + 4\tau _{{\text{xy}}}^2} $$
The shear stress at a point in a shaft subjected to a torque is
A Directly proportional to the polar moment of inertia and to the distance of the point from the axis
B Directly proportional to the applied torque and inversely proportional to the polar moment of inertia
C Directly proportional to the applied torque and the polar moment of inertia
D Inversely proportional to the applied torque and the polar moment of inertia
A closely coiled helical spring is acted upon by an axial force. The maximum shear stress developed in the spring is $$\tau $$. The half of the length of the spring if cut off and the remaining spring is acted upon by the same axial force. The maximum shear stress in the spring in new condition will be
A $$\frac{\tau }{2}$$
B $$\tau $$
C $$2\tau $$
D $$4\tau $$
When a shaft, is subjected to torsion, the shear stress induced in the shaft varies from
A Minimum at the center to maximum at the circumference
B Maximum at the center to minimum at the circumference
C Zero at the center to maximum at the circumference
D Maximum at the center to zero at the circumference
When a shaft is subjected to a twisting moment, every cross section of the shaft will be under _____ stress.
A tensile
B compressive
C shear
D bending

Next steps