Related Questions

The secondary unbalanced force due to inertia of reciprocating parts in a reciprocating engine is given by (where m = Mass of reciprocating parts, $$\omega $$ = Angular speed of crank, r = Radius of crank, $$\theta $$ = Angle of inclination of crank with the line of stroke and n = Ratio of the length of connecting rod to radius of crank)
A $${\text{m}}{\omega ^2}{\text{r}}\sin \theta $$
B $${\text{m}}{\omega ^2}{\text{r}}\cos \theta $$
C $${\text{m}}{\omega ^2}{\text{r}}\frac{{\sin 2\theta }}{{\text{n}}}$$
D $${\text{m}}{\omega ^2}{\text{r}}\frac{{\cos2\theta }}{{\text{n}}}$$
The primary unbalanced force due to inertia of reciprocating parts in a reciprocating engine is given by (where m = Mass of reciprocating parts, $$\omega $$ = Angular speed of crank, r = Radius of crank, $$\theta $$ = Angle of inclination of crank with the line of stroke and n = Ratio of the length of connecting rod to radius of crank)
A $${\text{m}}{\omega ^2}{\text{r}}\sin \theta $$
B $${\text{m}}{\omega ^2}{\text{r}}\cos \theta $$
C $${\text{m}}{\omega ^2}{\text{r}}\frac{{\sin 2\theta }}{{\text{n}}}$$
D $${\text{m}}{\omega ^2}{\text{r}}\frac{{\cos2\theta }}{{\text{n}}}$$
The tractive force in a locomotive with two cylinders is given by (where c = Fraction of reciprocating parts per cylinder, m = Mass of reciprocating parts, $$\omega $$ = Angular speed of crank, r = Radius of crank and $$\theta $$ = Angle of inclination of crank to the line of stroke)
A $${\text{m}}{\omega ^2}{\text{r}}\cos \theta $$
B $${\text{cm}}{\omega ^2}{\text{r}}\sin \theta $$
C $$\left( {1 - {\text{c}}} \right){\text{m}}{\omega ^2}{\text{r}}\left( {\cos \theta - \sin \theta } \right)$$
D $${\text{m}}{\omega ^2}{\text{r}}\left( {\cos \theta - \sin \theta } \right)$$
The primary unbalanced force is maximum when the angle of inclination of the crank with the line of stroke is
A 0°
B 90°
C 180°
D 360°
When the primary direct crank of a reciprocating engine makes an angle of $$\theta $$ with the line of stroke, then the secondary direct crank will make an angle of _________ with the line of stroke.
A $$\frac{\theta }{2}$$
B $$\theta $$
C $$2\theta $$
D $$4\theta $$
The velocity of piston in a reciprocating steam engine is given by (where $$\omega $$ = Angular velocity of crank, r = Radius of crank pin circle, $$\theta $$ = Angle turned by crank from inner dead center and n = Ratio of length of connecting rod to the radius of crank)
A $$\omega {\text{r}}\left( {\sin \theta + \frac{{\sin 2\theta }}{{\text{n}}}} \right)$$
B $$\omega {\text{r}}\left( {\cos\theta + \frac{{\cos2\theta }}{{\text{n}}}} \right)$$
C $${\omega ^2}{\text{r}}\left( {\sin \theta + \frac{{\sin 2\theta }}{{\text{n}}}} \right)$$
D $${\omega ^2}{\text{r}}\left( {\cos\theta + \frac{{\cos2\theta }}{{\text{n}}}} \right)$$
The tractive force is maximum or minimum when the angle of inclination of crank with the line of stroke (θ) is equal to
A 0° and 90°
B 90° and 180°
C 135° and 315°
D 270° and 360°
The secondary unbalanced force is __________ the primary unbalanced force.
A One-half
B Two-third
C n times
D $$\frac{1}{{\text{n}}}$$ times
The swaying couple is maximum or minimum when the angle of inclination of the crank to the line of stroke (θ) is equal to
A 90° and 180°
B 45° and 225°
C 180° and 270°
D 270° and 360°
The secondary unbalanced force is maximum __________ in one revolution of the crank.
A Two times
B Four times
C Eight times
D Sixteen times

Next steps