You are about to install a second IDE hard drive in a PC that has only one IDE adapter. Your first hard drive will still be the boot drive. How should the second drive be configured?

You are installing an IDE hard drive that will be your boot drive. Which is the correct order of steps that need to be followed?

A

jumper properly, auto-detect(or configure manually) in CMOS, low level format, high level format, partition

B

jumper properly, auto-detect(or configure manually) in CMOS, partition, high level format with / s switch

C

jumper properly, partition, auto-detect(or configure manually in CMOS, high level format with /s switch

D

jumper properly, auto-detect in CMOS, regular format

E

jumper properly, partition, low level format, high level format

You just installed a new IDE hard drive, but your system BIOS will not recognize the new drive, what should you check first.

A

cable sequence

B

jumpers on the hard drive

C

drivers that need to be loaded

D

hard drive manufacturer web site information

E

None of the above

Hard disk এর পিছনের জাম্পার সেটিং ঠিক না থাকলে যে সমস্যা হয় -i. সফটওয়্যার install করা যায় নাii. Boot disk failureiii. Hard disk not found দেখায়নিচের কোনটি সঠিক?

A

i ও ii

B

i ও iii

C

ii ও iii

D

i, ii ও iii

A system has two IDE hard drives that are each divided into primary and extended partitions, which drive letter is assigned to the primary partition of the second drive?

A

C

B

D

C

E

D

F

E

None of the above

You have configured a Group Policy Object (GPO) for the marketing oranization unit (OU) to prevent users from accessing My Network Places and from running System in Control Panel. You want the Managers Domain Local Group to be able to access My Network Places, but you still want to prevent them from running System in Control Panel. What should you do?

A

Add the Managers group to the access control list of the GPO. Disable the permission of the managers group to read and apply the Group Policy

B

Add the Managers group to the access control list of the GPO. Deny the permission of the managers group to read and apply the Group Policy

C

Create a second GPO in the OU. Add the Managers group to the access control list. Allow the managers group to apply the Group Policy. Deny the Authenticated Users group permission to read and apply th

D

Create a second GPO in the OU. Add the Managers group to the access control list. Allow the managers group to apply the Group Policy. Disable the Authenticated Users group permission to read and apply

E

None of above

You are the administrator of contoso.local domain. You organize the domain into organizational units as shown in the EXHIBIT. You configure the local security options and other settings for the default domain policy object You delegate administration of Michigan and Florida OU. You want to prevent those administrators from creating any other group policy objects with settings that conflict with those you configured.What should you do?

A

From the group policy options from the contoso.local domains set the option not override

B

From the group policy options from the Michigan and Florida OU, set the option not override

C

Block the group policy inheritance for the contoso.local domain

D

Block the group policy inheritance for Michigan and Florida OU

E

None of above

Your IDE hard drive is not spinning up when you turn on the PC. What is the most likely problem.

A

bad data cable

B

incorrect jumper setting on drive

C

loose molex connector

D

virus

E

tfad system board

You want to install a new internal CD-ROM drive. You must first confirm that there will be no IRQ conflicts. How should you do this?

A

Use Server Manager

B

Use Windows NT Diagnostics

C

Use the Devices option in Control Panel

D

Use the Add/Remove Programs option in Control Panel

E

None of the above

In a computer with an eide adapter, where should you connect an ATA CD-ROM drive?

A

on the floppy bus

B

on the primary IDE

C

on the secondary IDE

D

on the SCSI bus

E

All of the above

Your PC tells you that your 200 M hard drive is out of space . However , when you run DIR .the total size of your files add to less than 200 M. How do you account for this difference ?

A

Rounding

B

Hidden files

C

Math error

D

Drive specifications are in hexadecimal , whereas the DIR Command calculates decimal

You are about to install a second IDE hard drive in a PC that has only one IDE adapter. Your first hard drive will still be the boot drive. How should the second drive be configured?

Related Questions