You want to install a new internal CD-ROM drive. You must first confirm that there will be no IRQ conflicts. How should you do this?

You are installing a network interface card on a computer with the following configuration: a 5867133 CPU, 16MB or RAM, a 800-MB IDE hard disk, a parallel port configured as LPT1, and a serial port configured as COM1, which is currently used by a mouse. In addition to the IDE host adapter and the video card, the following devices have been installed on the computer's expansion bus: a modem on COM2, a SCSI host adapter for a CD-ROM drive, and a sound card. The SCSI hose adapter is using IRQ 5, and the sound card is using IRQ 11. The network interface card that you are installing supports the following choices for IRQ: 2, 3, 4, 5, 9,10 and 11. Which IRQ(s) could you use for the network interface card without creating an IRQ conflict with another device?

A

2

B

4

C

5

D

10

E

None of the above

Your Windows 2000 Server computer uses a non-Plug and Play ISA modem configured to use IRQ 5. You add a PCI modem and restart the computer. Device Manager reports an IRQ conflict between the two modems. Both modem are trying to use IRQ 5. You want to resolve the problem. What should you do?

A

Use Device Manager to change the IRQ for the original modem to IRQ 9

B

Use Device Manager to change the IRQ for the original modem to IRQ 10

C

Edit the CMOS settings on the computer to reserve IRQ 5 for non-Plug and Play devices

D

Edit the CMOS settings on the computer to reserve IRQ 10 for non-Plug and Play devices

E

None Of above

You want to install Windows 2000 server on 15 new computers. You want to install, configure and test all 2000 servers before shipping them to your branch offices. You want the users at the branch offices to enter the serial numbers and computer names once they receive the computers. What should you do?

A

Install Windows 2000 server on the computers. Use Sysprep.exe to create the Unattend.txt file, place file on the root of the drive

B

Install Windows 2000 server on the computers. Use Setup Manager to create a sysprep.inf file for use with sysprep.exe Place the sysprep.inf on the computers and run sysprep -noidgen

C

Create an Unattend.txt file by using Setup Manager. Create a UDF file that identifies the names of the new computers

D

Create a UDF file by using setup manager. Create an Unattend.txt file that identifies the names of the new computers

E

None of above

You are preparing to install Certificate Services for the first time on your Windows 2000 network. You plan to install Certificate Services on a Windows 2000 Server computer that is a member of the domain. You want the certification authority (CA) to be able to use Active Directory. Which CA type should you select when you install Certificate Services?

A

Enterprise root CA

B

Enterprise subordinate CA

C

Stand-alone root CA

D

Stand-alone subordinate CA

You are about to install a second IDE hard drive in a PC that has only one IDE adapter. Your first hard drive will still be the boot drive. How should the second drive be configured?

A

as a master

B

as a secondary

C

as a slave

D

as a primary

E

as auto-select

You install and run a third-party 32-bit application named Application on your Windows 2000 Server computer. After several days, the application stops responding. You open Task Manager and find that the CPU usage is at 100 percent. The normal range of CPU usage on the server is from 20 percent to 30 percent You end the application. However, you see that the CPU on the server is still at 100 percent. Task Manager shows no other applications running. You then examine the Processes page in Task Manager and confirm that the Application.exe process is no longer running. You want to return the CPU usage to its normal range. What should you do?

A

Use Computer Management to stop and restart the Server service

B

Use Computer Management to stop and restart the Workstation service

C

Use Task Manager to end any related child processes

D

Use Task Manager to end and automatically restart the Explorer.exe process

E

None of above

You are the administrator of Windows 2000 Server network. On each server you format a separate system partition and a separate boot partition as NTFS. Several months later you shut down one of the computers for maintenance. When you try to restart the computer you receive the following error message "NTLDR is missing, press any key to restart". You want to install a new NTLDR file on the computer but you do not want to loose any settings you made since the installation. What should you do?

A

Start the computer by using Windows 2000 Server computer CD-ROM and choose tools to repair the installation. Select recovery console and copy the NTLDR file on the CD-ROM to the root of the system vol

B

Start the computer by using the Windows 2000 server CD- ROM, choose to reinstall. When the installation is complete copy the NTLDR to the root of the boot volume

C

Start the computer by using the Windows 2000 bootable floppy disk. From a command prompt run the sfc/scanboot command

D

Start the computer by using Windows 2000 bootable floppy disk. Run the file signature verification utility

E

None of above

You want to provide complete redundancy for all data stored on your hardware RAID 5 array. You install second h/w Raid 5. You want to create a mirror set of the original array. However when you right click the free space on new array you see no option to create a new volume or mirrrored volume. What should you do?

A

Convert both to dynamic disks

B

Create an empty extended partition on new disk

C

Create a single unformatted primary partition on new array

D

Format new disk array as a single NTFS primary partition

E

Format the new disk array as a single NTFS logical drive in an extended partition.

You install Terminal Services on a Windows 2000 domain controller. You install Terminal Services Client on users' client computers. Users report that when they try to connect to the Terminal server, they receive the following error message: "The local policy of this system does not allow you to logon interactively." When you attempt to log on to the Terminal server as an administrator from a user's computer, you log on successfully. You want users to be able to log on to the Terminal server. What should you do?

A

Grant the users the right to log on as a service

B

Grant the users the right to log on locally

C

Grant the users the right to log on over the network

D

Copy the users' prpfiles to the Terminal server

E

Copy the users' home folders to the Terminal server

S₁: The right way to get people do things the way you want is not to compel them, drive them or for that matter even beg them or entreat them.
P: The sure way to antagonise an individual is to give him the impression that you are out to force or compel him to do something.
Q: The correct way is, therefore, to arouse a want in them and make them do, whatever you want them to do willingly, happily and eagerly.
R: It is the most difficult thing in the world to make an individual do anything against his will.
S: Even young, innocent children resent being made to do things.
S₆: The secret of motivation, therefore, lies in your ability to arouse the right kind of want or thirst in the other people.

The Proper sequence should be:

A

PRQS

B

QSPR

C

RPSQ

D

SRQP

You want to install a new internal CD-ROM drive. You must first confirm that there will be no IRQ conflicts. How should you do this?

Related Questions