Related Questions

Two involute gears are designed to mesh for a given centre distance and a given angular velocity ratio (other than 1). During assembly, the centre distance has increased slightly. Then which of the following changes occur? (i) Velocity ratio changes (ii) Pressure angle changes (iii) Pitch circle diameter changes (iv) Working depth changes (v) Base circle radius changes Select the correct answer using the code given below.
In case of joint products, the main objective of accounting of the cost is to apportion the joint costs incurred up to the split off point. For cost apportionment one company has chosen Physical Quantity Method. Three joint products ‘A’, ‘B’ and ‘C’ are produced in the same process. Up to the point of split off the total production of A, B and C is 60,000 kg, out of which ‘A’ produces 30,000 kg and joint costs are Rs 3,60,000. Joint costs allocated to product A is.
Mundel's classes of change includes
1. Changes in body motions and positions
2. Changes in equipment and working arrangements
3. Changes in production sequence
4. Changes in finished product
5. Changes in raw material
A 10 m high slope of dry clay soil (unit weight = 20 kN/m3), with a slope angle of 450 and the circular slip surface, is shown in the figure (not drawn to the scale). The weight of the slip wedge is denoted by. W. The undrained unit cohesion (Cu) is 60 kPa. The factor of safety of the slope against slip failure, is
Natural numbers 4 to 15 are written on different slips (one number on one slip), kept in a box and mixed well. Renu picks up one slip from the box without looking into it. What is the probability that this slip bears a prime number?
Numbers 10 to 60 are written on separate slips (one number on one slip), they are kept in a box and then they are mixed well. One slip is chosen from the box without looking into it. What is the probability that the number on the chosen slip is divisible by both 2 and 3?
Numbers 29, 30, 31, ....., 88, 89 and 90 are written on slips (one number on one slip) and these slips are kept in a box. Then, a slip is drawn from the box at random. What is the probability that number in the drawn slip is not a prime number?
Slip plane along with the direction of slip is called a slip system.
A 3-phase induction motor is operating at slip ‘s’. If the slip is reversed, its slip at the instant will be _________
In a three phase induction motor, voltage between the slip rings at standstill is 50 V. At full load the slip is 0.04. The voltage between slip rings at full load is?