Automobile Engineering MCQ

Test your knowledge with important Automobile Engineering MCQ and their applications. These MCQs are beneficial for competitive exams too. Explore 30 + more Automobile Engineering MCQs at Bissoy

• The first chapter of the act indicates about-
  ক

  Control of transport vehicle

  খ

  Preliminary

  গ

  Offences

  ঘ

  None of the above
• Which one of the following pairs is incorrect?
  ক

  Bajaj Auto ⇔ Two wheelers and Three wheelers

  খ

  Mahindra & Mahindra ⇔ Jeeps and Tractors

  গ

  Premier Automobiles ⇔ Petrol cars and Diesel cars

  ঘ

  TELCO ⇔ Tractors and trucks
• The motor vehicle act was first revised in . . . . . . . .
  ক

  1939

  খ

  1988

  গ

  1989

  ঘ

  1987
• The type of rear axle on trucks is
  ক

  Semi floating

  খ

  Fully floating

  গ

  Three quarter floating

  ঘ

  None of these
• The motor vehicle Act 1977 has . . . . . . . . schedules.
  ক

  20

  খ

  15

  গ

  10

  ঘ

  12
• Medical certificate required to for driving license of the vehicle in . . . . . . . . category
  ক

  Passenger

  খ

  Transport

  গ

  Goods Carriage

  ঘ

  All
• A tyre is designated as P 205/65 R12. Aspect ratio of this tyre is:
  ক

  205

  খ

  100

  গ

  65

  ঘ

  12
• The limits of speed for motor vehicles are in which of the following schedule?
  ক

  First

  খ

  Eight

  গ

  Sixth

  ঘ

  Fifth
• Which data is mainly recorded in the "log book" of the vehicle?
  ক

  Performance of the vehicle

  খ

  Running time for a trip

  গ

  Loading, unloading of vehicle

  ঘ

  None of the above
• The chemical reaction that makes bio-diesel is known as
  ক

  Esterification

  খ

  Polymerisation

  গ

  Sublimation

  ঘ

  Fermentation
• Which one of the following statement is correct with regard to the viscous coupling?
  ক

  The outer and inner plates contained in the viscous coupling engage as a result of the pressure generated by the difference in their speeds, and in doing so they transfer torque

  খ

  In the viscous coupling, the viscosity of the silicone oil limits the speed differential between the outer and inner plates

  গ

  In the viscous coupling, torque is transferred between the outer and inner plates through the action of ATF

  ঘ

  Engine oil is supplied to the viscous coupling for cooling and lubrication
• As per the Central Motor Vehicle Rules, 1989 TREM stands for . . . . . . . .
  ক

  Transport Efficient Motors

  খ

  Tariff Effects on Mediators

  গ

  Transport Elicit Motors

  ঘ

  Tractor Emission Norms
• The shell mounted on the crankshaft is called-
  ক

  Runner or driven member

  খ

  Impeller or driving member

  গ

  Both are correct

  ঘ

  None are correct
• A torque converter multiplies torque when the stator is free wheeling-
  ক

  True

  খ

  False

  গ

  Both are correct

  ঘ

  None of these
• LCV have gross vehicle weight range as
  ক

  1.5 - 6.0 tonnes

  খ

  5.0 - 8.5 tonnes

  গ

  8.0 - 10.0 tonnes

  ঘ

  10.0 - 16.0 tonnes
• Which of the following is the cause of the trouble 'oil leakage'?
  ক

  Defective or broken gasket or oil seals

  খ

  Loose mounting

  গ

  Excessive lubricant

  ঘ

  All are correct
• Road tax is dependent on the<br>1. Vehicle weight<br>2. R. L. W.<br>3. Passengers allowed (seating capacity)<br>4. Permit obtained
  ক

  All above are correct

  খ

  1, 2, 3 are correct

  গ

  1 and 2 are correct

  ঘ

  1 alone is correct
• A person renews his licence at the age of 47 his license is valid the: next . . . . . . . . Years
  ক

  3 years

  খ

  20 years

  গ

  10 years

  ঘ

  5 years
• "Certificate of registration" provision is covered under
  ক

  Chapter IV of motor vehicle act, 1988

  খ

  Chapter V of motor vehicle act, 1988

  গ

  No chapter is Assigned

  ঘ

  Both A and B
• What is the remedy of the cause "carbon deposit in combustion chamber"?
  ক

  Clean the exhaust pipe

  খ

  Tight the chamber

  গ

  Decarbonize the engine

  ঘ

  All are correct
• How much is the fine amount kept for drivirig a vehicle without a permit
  ক

  Up to 15,000

  খ

  Up to 20,000

  গ

  Up to 10,000

  ঘ

  Up to 2S,000
• CMVR revised in the year . . . . . . . . is being enforced today.
  ক

  1988

  খ

  1956

  গ

  1979

  ঘ

  1989
• The universal joints are used with propeller shaft or axle shafts,
  ক

  To compensate for variations in the relative positions of the differential and wheels which results from bumpy road surface or other similar driving conditions

  খ

  To absorb vibrations transferred form the surface of the r

  গ

  To absorb any difference in speed between the left and right wheels when the vehicle is turning

  ঘ

  To compensate for variations in the directions of the front wheels during steering
• The fluid drive is one name for . . . . . . . . to transmit turning effort from the engine to the clutch.
  ক

  Solid coupling

  খ

  Plasma coupling

  গ

  Liquid coupling

  ঘ

  Gas coupling
• If 'V' is vehicle speed (in metres/min) and 'R' is radius of driving wheel (in metres) then the rpm of the driving wheel is given by
  ক

  $$rpm = {V \over {2\pi R}}$$

  খ

  $$rpm = {{2\pi V} \over R}$$

  গ

  $$rpm = {{\pi R} \over V}$$

  ঘ

  $$rpm = {{\pi V} \over R}$$
• What is the penalty fee for racing or speeding?
  ক

  5000

  খ

  2000

  গ

  1000

  ঘ

  10,000
• An application for the grant of authorization for a tourist permit shall be made in Form 46 and shall be accompanied by a fee of Rs. . . . . . . . . per annum in terms of a bank draft.
  ক

  600

  খ

  400

  গ

  900

  ঘ

  500
• . . . . . . . . means a motor vehicle specially designed and constructed, and not merely adapted, for the use of a person suffering from some physical defect or disability, and used solely by or for such a person.
  ক

  Invalid carriage

  খ

  Articulated vehicle

  গ

  Tractor

  ঘ

  None of the above
• The active safety technologies are
  ক

  Vehicle stability assist

  খ

  Tyre pressure monitoring system

  গ

  Adaptive cruise control

  ঘ

  All of these
• P. C. R. A. is situated at
  ক

  Baroda

  খ

  Bhopal

  গ

  Bhuvaneswar

  ঘ

  Mumbai