Related Questions

A 10 kW, 400 V, 3-phase, 4-pole, 50 Hz induction motor develops the rated output at rated voltage with its slip rings shorted. The maximum torque equal to twice the full load torque occurs at the slip of 10% with zero external resistance in the rotor circuit. The slip at the full load torque will be?
A 10 kW, 400 V, 3-phase, 4-pole, 50 Hz induction motor develops the rated output at rated voltage with its slip rings shorted. The maximum torque is twice the full load torque occurs at the slip of 10% with zero external resistance in the rotor circuit. An external resistance is now tripled in the rotor circuit. Then the slip at which maximum torque occur for the same load torque is?
A 10 kW, 400 V, 3-phase, 4-pole, 50 Hz induction motor develops the rated output at rated voltage with its slip rings shorted. The maximum torque is twice the full load torque occurs at the slip of 10% with zero external resistance in the rotor circuit. The speed at the full load torque will be?
A 4-pole, 3-phase slip ring induction motor is used as a frequency changer. Its stator is excited from 3-phase, 50 Hz supply. A load requiring 3-phase, 20 Hz supply is connected to the star-connected rotor through three slip-rings of SRIM. At what two speeds the prime mover should drive the rotor of this SRIM?
(I) Even at no load a large 3-phase squirrel- cage induction motor is started at reduced voltage than rated. (II) If a large 3–phase squirrel-cage induction motor with no load is started at full voltage, it will be damaged.
A 10 kW, 400 V, 3-phase, 4-pole, 50 Hz induction motor develops the rated output at rated voltage with its slip rings shorted. The maximum torque is twice the full load torque occurs at the slip of 10% with zero external resistance in the rotor circuit. An external resistance is now tripled in the rotor circuit. Then the stator current will _________
A 3-phase, 6-pole, 50 Hz induction motor has a full load speed of 960 rpm with its slip rings short circuited. The motor drives the constant load. If the speed is reduced to 800 rpm, then ohmic losses will be?
A 3-phase, 6-pole, 50 Hz induction motor has a full load speed of 960 rpm with its slip rings short-circuited. The motor drives the constant load. If the speed is reduced to 400 rpm, then ohmic losses will be?
A three phase induction motor is connected to 400V, 50 hz supply. If the stator to rotor turn ratio is 2, the standstill rotor induced voltage per phase is?
For a three phase induction motor, maximum torque is double the full load torque and starting torque is 1.6 times the full load torque. To get a full load slip of 5%, percentage reduction in the rotor resistance should be?