Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

The following diagram shows a positive edge dislocation. The AA’ shows the slip plane for the dislocation. Above the slip plane stress is _________ in nature, and below the slip plane stress is _______ in nature.
This are the following statements given regarding satellite’s motion a. A satellite in geostationary orbit lies in the same plane with equator b. A satellite in geosynchronous orbit lies in the same plane with equator c. A satellite in geostationary orbit does not lie in the same plane with equator, it is inclined at some angle from plane of equator d. A satellite in geosynchronous orbit does not lie in the same plane with equator, it is inclined at some angle from plane of equator Choose one of the following options
A line of 12 cm length is perpendicular to profile plane and the least distance from this line to profile plane is 6 cm. This is at a distance of 4 cm from the vertical plane and 5 cm from the horizontal plane. What is distance from the point on line far away from the profile plane to profile plane?
Consider the following statements: X. Two-dimensional stresses applied to a thin plater in its own plane represent the plane stress condition. Y. Normal and shear stresses may occur simultaneously on a plane. Z. Under plane stress condition, the strain in the direction perpendicular to the plane is zero. Which of the above statements are correct?
A rider is riding his bike along the sides of a square ground. He drives the bike with the speed of 10 km/h along one side, 15 km/h along another side, 18 km/h along the third side, and 20 km/h along the last side and reaches the starting point. What is the average speed of the bike along the sides of the ground?
Slip begins when the shearing stress on the slip plane in the slip direction reaches a threshold value called the critical resolved shear stress.
Consider a two-sided discrete-time signal (neither left sided, nor right sided). The region of convergence (ROC) of the z-transform of the sequence is: 1) All region of z-plane outside a unit circle (in z-plane) 2) All region of z-plane inside a unit circle (in z-plane) 3) Ring in z-plane Which of the above is/are correct?
In bit-plane slicing if an image is represented by 8 bits and is composed of eight 1-bit plane, with plane 0 showing least significant bit and plane 7 showing most significant bit. Then, which plane(s) contain the majority of visually significant data.
A solid rod of circular cross-section made of brittle material, when subjected to torsion, fails along a plane at 45° to the axis of the rod. Consider the following statements as pertaining there to: 1. Distortion energy is maximum on this 45° plane. 2. Shear stress is maximum on this 45° plane. 3. Normal stress is maximum on this 45° plane. Which of the above is/are correct? 
A body of mass 10 kg is initially stationary on a 45° inclined plane as shown in figure. The coefficient of dynamic friction between the body and the plane is 0.3. The body slides down the plane and attains a velocity of 20 m/s. The distance travelled (in metre) by the body along the plane is close to