Related Questions

If the main reinforcement of the slab is parallel to a T-beam, the transverse reinforcement at mid span of the slab is provided at least __________ of main reinforcement.
A 40%
B 50%
C 60%
D 70%
The spacing of transverse reinforcement of column is decided by the following consideration.
A The least lateral dimension of the column
B Sixteen times the diameter of the smallest longitudinal reinforcing rods in the column
C Forty-eight times the diameter of transverse reinforcement
D All the above
Which of the following property sets pitch or tone (high or low) for the synthesized speech when reading an element; the pitch may be specified absolutely or relative to the normal pitch for the voice-family used to read the text?
A voice-check
B voice-format
C voice-pitch
D voice-volume
The transverse reinforcements provided at right angles to the main reinforcement
A Distribute the load
B Resist the temperature stresses
C Resist the shrinkage stress
D All the above
The diameter of transverse reinforcement of columns should be equal to one-fourth of the diameter of the main steel rods but not less than
A 4 mm
B 5 mm
C 6 mm
D 7 mm
ACI Code অনুসারে Column এর Minimum longitudinal reinforcement কত?
A ০.৫%
B ১%
C ২%
D ৩%
In a slab, the pitch of the main reinforcement should not exceed its effective depth
A Three times
B Four times
C Five times
D Two times
According to Euler's column theory, the crippling load for a column of length (l) fixed at both ends is __________ the crippling load for a similar column hinged at both ends.
A Equal to
B Two times
C Four times
D Eight times
-Column row+Column row+Column row এই ফরমূলা কিসের?
A ভাগ এর
B যোগ এর
C গুণ এর
D বিয়োগ এর
The zone in which transverse bending is likely to occur may be obtained by drawing a line from the faces of the column making an angle θ° with horizontal where θ° is
A 30°
B 45°
C 60°
D None of these

Next steps