Bissoy.com
Doctors Medicines MCQs Q&A

If a concrete column 200 × 200 mm in cross-section is reinforced with four steel bars of 1200 mm2 total cross-sectional area. Calculate the safe load for the column if permissible stress in concrete is 5 N/mm2 and Es is 15 Ec

If a concrete column 200 × 200 mm in cross-section is reinforced with four steel bars of 1200 mm2 total cross-sectional area. Calculate the safe load for the column if permissible stress in concrete is 5 N/mm2 and Es is 15 Ec Correct Answer 284 MN

Related Questions

A reinforced concrete circular section of 50,000 mm2 cross-sectional area carries 6 reinforcing bars whose total area is 500 mm2. If the concrete is not to be stressed more than 3.5 MPa and modular ratio for steel and concrete is 18, the safe load the column can carry will be nearly
A short column 20cm × 20cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 1300 kg/cm2 , the Safe load on the column, should not exceed
A short column 20 cm × 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2, the Safe load on the column, should not exceed
Consider the following statements for Euler’s equation to find the critical load of a column : 1. Critical load of a column is proportional to the flexural rigidity. 2. Critical load of a column depends upon yield stress. 3. Critical load of a column is inversely proportional to the length of the column. 4. Critical load of a column is inversely proportional to the square of the length of the column. Which of the above statements are correct?
Connie has a number of gold bars, all of different weights. She gives the 24 lightest bars, which weigh 45% of the total weight, to Brennan. She gives the 13 heaviest bars, which weigh 26% of the total weight, to Maya. She gives the rest of the bars to Blair. How many bars did Blair receive?
Two similar bars of Steel and Aluminium are heated to a same temperature. Forces are applied at the ends of the bars to maintain their lengths unaltered. If the ratio of Young’s moduli of Steel and Aluminium is 3, and the ratio of the coefficients of thermal expansion of Steel to that of Aluminium is 0.5, what is the stress on the Aluminium bar if the stress on the Steel bar is 100 MPa?
Permeability in concrete is studied towards providing for, or guarding against, which of the following features? 1. The penetration by materials in solution may adversely affect the durability of concrete; moreover, aggressive liquids 'attack' the concrete. 2. In the case of reinforced concrete, ingress of moisture and air will result in corrosion of steel leading to an increase in the volume of steel, resulting in cracking and swilling of the concrete cover. 3. The moisture penetration depends on permeability and if the concrete can become saturated with water it is less vulnerable to frost action.
If a rectangular under–reinforced section is subjected to bending moment equal to its moment carrying capacity and the stress in steel and extreme compression fiber of concrete at this moment are σs and σc respectively then which of the following is correct? Where, fy and fc are the permissible stresses in steel and concrete respectively.
Consider the following statements: 1. Functions of reinforcement in reinforced soil and in reinforced concrete are comparable. 2. The design of a geotextile reinforced wall is similar in principle to that of a reinforced earth wall. Which of the above statements is/are correct?
A steel column of ISHB 350 @72.4 kg/m is subjected to a factored axial compressive load of 2000 kN. The load is transferred to a concrete pedestal of grade M20 through square base plate. Consider the bearing strength of concrete as 0.45 fck, where fck is the characteristic strength of concrete. Using limit state method and neglecting the self-weight of base plate and steel column, the length of a side of the base plate to be provided is