Related Questions

Humayun is asked to write a guide for GMAT exam preparation. For his work the publishing company giving him a choice of a one time payment of tk. 25,625 or tk.15.75 per guide sold.How many guide need to be sold for the totsl income received by Humayun to be the same from either choice?
A 1250
B 1437
C 1500
D 1550
The bending moment at a section tends to bend or deflect the beam and the internal stresses resist its bending. The resistance offered by the internal stresses, to the bending, is called
A Compressive stress
B Shear stress
C Bending stress
D Elastic modulus
In a simple bending theory, one of the assumptions is that the plane sections before bending remain plane after bending. This assumption means that
A Stress is uniform throughout the beam
B Strain is uniform throughout the beam
C Stress is proportional to the distance from the neutral axis
D Strain is proportional to the distance from the neutral axis
A shaft is subjected to bending moment M and a torque T simultaneously. The ratio of the maximum bending stress to maximum shear stress developed in the shaft, is
A $$\frac{{\text{M}}}{{\text{T}}}$$
B $$\frac{{\text{T}}}{{\text{M}}}$$
C $$\frac{{2{\text{M}}}}{{\text{T}}}$$
D $$\frac{{2{\text{T}}}}{{\text{M}}}$$
If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span of a square flat slab, should not be less than
A $$\frac{{{\text{WL}}}}{{12}}{\left( {{\text{L}} - \frac{{2{\text{D}}}}{3}} \right)^2}$$
B $$\frac{{{\text{WL}}}}{{10}}{\left( {{\text{L}} + \frac{{2{\text{D}}}}{3}} \right)^2}$$
C $$\frac{{{\text{WL}}}}{{10}}{\left( {{\text{L}} - \frac{{2{\text{D}}}}{3}} \right)^2}$$
D $$\frac{{{\text{WL}}}}{{12}}{\left( {{\text{L}} - \frac{{\text{D}}}{3}} \right)^2}$$
The bending moment ‘M’ and a torque ‘T’ is applied on a solid circular shaft. If the maximum bending stress equals to maximum shear stress developed, then ‘M’ is equal to
A $$\frac{{\text{T}}}{2}$$
B 1T
C 2T
D 4T
A shaft of diameter D is subjected to a twisting moment (T) and a bending moment (M). If the maximum bending stress is equal to maximum shear stress developed, then M is equal to
A $$\frac{{\text{T}}}{2}$$
B T
C 2T
D 4T
The bending stress in abeam is __________ bending moment.
A Equal to
B Less than
C More than
D Directly proportional to
You have configured a Group Policy Object (GPO) for the marketing oranization unit (OU) to prevent users from accessing My Network Places and from running System in Control Panel. You want the Managers Domain Local Group to be able to access My Network Places, but you still want to prevent them from running System in Control Panel. What should you do?
A Add the Managers group to the access control list of the GPO. Disable the permission of the managers group to read and apply the Group Policy
B Add the Managers group to the access control list of the GPO. Deny the permission of the managers group to read and apply the Group Policy
C Create a second GPO in the OU. Add the Managers group to the access control list. Allow the managers group to apply the Group Policy. Deny the Authenticated Users group permission to read and apply th
D Create a second GPO in the OU. Add the Managers group to the access control list. Allow the managers group to apply the Group Policy. Disable the Authenticated Users group permission to read and apply
E None of above
The function of guide vanes in a reaction turbine is to
A Allow the water to enter the runner without shock
B Allow the water to flow over them, without forming eddies
C Allow the required quantity of water to enter the turbine
D All of the above

Next steps