Related Questions

A drafter who develops technical drawings of a highway overpass would most likely be a ________ drafter.
A Architectural
B Civil
C Mechanical
D Process piping
When only a small section of an interior area needs to be revealed the drafter can use a ________ section.
A Half
B Quarter
C Full
D Broken out
By using a ________ section of a cylindrical mechanical part the drafter should be able to show only one view of the part.
A Half
B Whole
C Revolved
D Broken out
Before starting an isometric drawing in Auto-CAD the drafter needs to ________.
A Set the grid to isometric
B Set the current layer to Def-points
C Turn Object Snap off
D Turn Ortho off
When creating a block the drafter needs to pay particular attention to selecting a base point because it determines the __________.
A Scale
B Rotation angle
C Insertion point
D Color
One filling pipe P is three times faster than another filling pipe Q , If P can fill the tank in 24 hours, then what is the time taken to completely fill the tank if both pipes are opened together?
A 12 hours
B 16 hours
C 18 hours
D 14 hours
A ________ section allows the drafter to create a Cutting Plane line which is not in a straight line across the part.
A Offset
B Half
C Whole
D Broken out
In order to create an accurate assembly drawing the drafter should create the ________ drawings first.
A Detail
B Title block
C Parts list
D Isometric
Inserting blocks into a drawing file usually requires exacting placement. The drafter should insure that ________ is turned on.
A O Snaps
B Ortho
C Grid
D Dynamic Input
The architectural drafter usually begins a set of working drawings by creating the ________ plan first.
A Foundation
B Floor plan
C Elevations
D Building section

Next steps