Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

When we compare the half bridge converter and full bridge converter 1. The maximum collector current of a full bridge is only double that of the half bridge 2. Full bridge uses 4-power switches instead of 2, as in the double bridge. 3. Output power of a full bridge is twice that of a half bridge with the same input voltage and current. When of the above statements are correct?
Four friends A, B, C and D need to cross a bridge. A maximum two persons can cross it at a time. It is night and they just have one lamp. Persons that cross the bridge must carry the lamp to find the way. A pair must walk together at the speed of slower person. After crossing the bridge, the person having faster speed in the pair will return with the lamp each time to accompany another person in the group. Finally, the lamp has to be returned at the original place and the person who returns the lamp has to cross the bridge again without lamp. To cross the bridge, the time taken by them is as follows: A :1 minute, B : 2 minutes, C : 7 minutes and D : 10 minutes. What is the total minimum time required by all the friends to cross the bridge?
A boat is on the one side of a bridge and the other boat is on the other side of the bridge. The bridge is 36 meter above the river surface. The angles of depression of both the boats from the bridge point on the bridge are complementary to each other and the angle of depression of first boat from the bridge is tan-1(1/3), then what is the distance between both the boats?
A cow was standing on a bridge, 5m away from the middle of the bridge. A train was coming towards the bridge from the ends nearest to the cow. Seeing this cow ran towards the the train and managed to escape when the train was 2m away from bridge. If it had run in the opposite direction, it would hit by the train 2m before the end of the bridge. What is the lenght of the bridge in meters assuming the speed of the train is 4 times that of cow ?
Permeability in concrete is studied towards providing for, or guarding against, which of the following features? 1. The penetration by materials in solution may adversely affect the durability of concrete; moreover, aggressive liquids 'attack' the concrete. 2. In the case of reinforced concrete, ingress of moisture and air will result in corrosion of steel leading to an increase in the volume of steel, resulting in cracking and swilling of the concrete cover. 3. The moisture penetration depends on permeability and if the concrete can become saturated with water it is less vulnerable to frost action.
The following statements (S1, S2, S3) pertain to mass concreting. Which of the following statements are correct? S1: The materials preferred for mass concrete are: Portland cement with low heat of hydration, Pozzolanas, Aggregates (coarse and fine), Water, Admixture, Coolants. S2: Slump of mass concrete shall be the same or more than ordinary concrete work. S3: Concrete with a low water cement ratio, correctly consolidated and properly cured provides durability to mass concrete work.
Consider the following statements related to the advantages of concrete sleepers : 1. Concrete sleepers can generally be mass-produced using local resources. 2. Concrete sleepers are not suitable for better packing. 3. Concrete sleepers have a very long life span. 4. Concrete sleepers have no scrap value. Which of the above statements is/are correct?
Which of the following statements is/are true about the advantages of prestressed concrete structure? A. In the prestressed concrete structure, the deflection of beams is considerably reduced. B. Prestressing decreases cracks in concrete under all stages of loading. C. Prestressed concrete requires only 1/3 rd of the concrete required for R.C.C.
Consider the following statements: Presence of Na2O and K2O in concrete leads to 1. expansive reaction in concrete 2. cracking of concrete 3. disruption of concrete 4. shrinkage of concrete Which of the above statements are correct?
Consider the following statements: 1. If more water is added to concrete for increasing its workability, it results into concrete of low strength. 2. No slump is an indication of a good workable concrete. 3. Higher the slump of concrete, lower will be its workability. 4. Workability of concrete is affected by water content as well as water-cement ratio. Which of the above statements are correct?