Bissoy.com
Doctors Medicines MCQs Q&A

If the diameter of the work surface before machining(d1) is 100 mm and diameter of the machined surface(d2) is 50 mm. Then the depth of the cut is______ mm.

If the diameter of the work surface before machining(d1) is 100 mm and diameter of the machined surface(d2) is 50 mm. Then the depth of the cut is______ mm. Correct Answer 25

From the formula, depth of cut=(d1-d2)/2. Here 100-50 equal to 50 and by dividing it by 2 we can get value of depth of cut as 25.

Related Questions

Which of the following represents the formula for the depth of cut? d1=diameter of work surface before machining and d2=diameter of the machined surface
Depth of cut is the _______ distance between machined surface and non-machined surface of the workpiece.
Consider the following statements for a power shovel:
(i) Output can be increased by reducing the angle of swing for a given depth of cut.
(ii) For a given angle of swing, output will be maximum at optimum depth of cut.
(iii) Output can be increased by keeping the depth of cut less than optimum depth.
(iv) Output can be increased by increasing the size of shovel.
Last year, there were three sections in a competitive exam. Out of them 33 students cleared the cut-off in Section A, 34 students cleared the cut-off in Section B and 32 students cleared the cut-off in Section C. 10 students cleared the cut-off in section A and section B, 9 cleared the cut-off in section B and section C and 8 cleared the cut-off in section A and section C. The number of students who cleared only one section was equal and was 21 for each section. How many students cleared all the three sections?
Given below are two quantities named 1 and 2. Based on the given information, you have to determine the relationship between the two quantities. You should use the given data and your knowledge of Mathematics to choose between the possible answers. Quantity 1: P and Q can do a work in 6 days and Q and R can do a work in 60/7 days and P and R can do a work in 20/3 days. If Q and R work for first 2 days and left the work. Find the total time taken by P to complete the remaining work. Quantity 2: A and B can do a work in 8/3 days, B and C can do the same work in 3 days and A and C can do the same work in 24/5 days. In what time C alone can complete the work?
The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, and x = Depth of centre of gravity of the immersed surface from the liquid surface)
The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where $${I_{\text{G}}}$$ = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface and x = Depth of centre of gravity of the immersed surface from the liquid surface)
The depth of cut is the_____ distance measured from the machined surface to the surface of the work piece, which is uncut.
C takes twice as long as B to complete a work. A takes three times as long as C to complete the same work. A, B and C start working together. A leaves 6 days before the completion of work and B leaves 3 days before the completion of work and C works for x days. If B alone can complete the same work in 16 days, then in how many days the work will be completed?
The maximum average depth due to one day storm over an area of 100 km2 is 100 mm. Depth-Area-Duration (DAD) curves indicate that for the same area of 100 km
the maximum average depth for a 3 hour storm will be