Bissoy.com
Doctors Medicines MCQs Q&A

The depth of cut is the_____ distance measured from the machined surface to the surface of the work piece, which is uncut.

The depth of cut is the_____ distance measured from the machined surface to the surface of the work piece, which is uncut. Correct Answer perpendicular

It is the perpendicular distance measured from the machined surface to the surface of the work piece, which is uncut. Other factors remaining constant, the depth of cut varies inversely as the cutting speed.

Related Questions

Depth of cut is the _______ distance between machined surface and non-machined surface of the workpiece.
Consider the following statements for a power shovel:
(i) Output can be increased by reducing the angle of swing for a given depth of cut.
(ii) For a given angle of swing, output will be maximum at optimum depth of cut.
(iii) Output can be increased by keeping the depth of cut less than optimum depth.
(iv) Output can be increased by increasing the size of shovel.
A single-point cutting tool with 120C rake angle is used to machine a steel work-piece. The depth of cut, i.e., uncut thickness is 0.81 mm. The chip thickness under orthogonal machining condition is 1.8 mm. The shear angle is approximately
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: A can do a piece of work in 10 days and B can do the same work in 15 days. They start working together and after 4 days, A left the work. Find in how many days the total work will be completed. Quantity B: P can do a piece of work in 15 days and Q can do the same work in 25 days. They start working together and after 5 days, Q left the work. Find in how many days the remaining work will gets completed.
‘P’ taken 16 days to finish a piece of work. ‘Q’ takes 24 days to finish the same piece of work.  'R' takes 48 days to finish the same piece of work. How many days will all three of them together take to finish the same piece of work?
K and L can complete a piece of work together in 15 days. K starts working and works for 10 days to complete two-fifth piece of work. L completes the remaining piece of work. The per-day wages paid to L  is Rs. 200. How much does L earn from completion of the remaining piece of work?
A alone can do a piece of work in 10 days, A and B together can do the same piece of work in 20/3 days. A, B and C together can do the same piece of work in 40/7 days. In how many days can B and C together do the same piece of work?
18 men can complete a piece of work in 63 days. 9 women take 189 days to complete the same piece of work. How many days will 4 men, 9 women and 12 children together take to complete the piece of work if 7 children alone can complete the piece of work in 486 days ?
Last year, there were three sections in a competitive exam. Out of them 33 students cleared the cut-off in Section A, 34 students cleared the cut-off in Section B and 32 students cleared the cut-off in Section C. 10 students cleared the cut-off in section A and section B, 9 cleared the cut-off in section B and section C and 8 cleared the cut-off in section A and section C. The number of students who cleared only one section was equal and was 21 for each section. How many students cleared all the three sections?
A tailor had a number of shirt pieces to cut from large piece pieces of fabric. He cut each large piece into 10 smaller pieces. He cut at the rate of 45 cuts per minute. How many large pieces would be cut in 24 minutes?