Bissoy.com
Doctors Medicines MCQs Q&A

If the motor axial specific impulse of a given nozzle is 340s for propellant ‘A’ and its characteristic velocity is 1400 m/s, determine the specific impulse for the same nozzle using a propellant ‘B’ with a characteristic velocity of 980 m/s. Assume both propellants ‘A’ and ‘B’ have the same specific heat ratio.

If the motor axial specific impulse of a given nozzle is 340s for propellant ‘A’ and its characteristic velocity is 1400 m/s, determine the specific impulse for the same nozzle using a propellant ‘B’ with a characteristic velocity of 980 m/s. Assume both propellants ‘A’ and ‘B’ have the same specific heat ratio. Correct Answer 238 s

Isp2 = Isp1 x C2*/C1* = 340 x 980 / 1400 = 238 s.

Related Questions

Consider the following statements: In case of helical gears, teeth are cut at an angle to the axis of rotation of the gears. 1) Helix angle introduces another ratio called axial contact ratio. 2) Transverse contact ratio is equal to axial contact ratio in helical gears. 3) Large transverse contact ratio does not allow multiple teeth to share the load. 4) Large axial contact ratio will cause larger axial force component Which of the above statements are correct?
Consider the following statements: In the above figure, the curves pertain to the DC motor A. Speed vs Armature current characteristic of a DC shunt motor B. Torque vs Armature current characteristic of a DC shunt motor C. Speed vs Armature current characteristic of a DC series motor D. Torque vs Armature current characteristic of a DC series motor
Two quantities I and II are given in the following questions. You have to find the values of both I and II by using your knowledge of mathematics and choose the most suitable relation between quantity I and II from the given options. Quantity I: Two persons A and B started a business with their certain initial capital. If A and B invested their capital in the business for 12 years and 8 years respectively and the ratio of their profit from the business is 21 : 16, then what is the initial capital invested by A if B invested Rs. 16000. (Consider only numerical value) Quantity II: Ratio of male to female who have a Visa card is 8 : 5 while the ratio of male to female who have a Master card is 4 : 7. The ratio of males who have a Visa card to those who have a Master card is 2 : 1. If the total number of males who have both cards is 15000 then find the total number of females who have both cards?
Determine the density specific impulse (Id) if the specific impulse is 315 s and the average density of the propellants is 840 kg/m3. Take the reference density to be the maximum density of water.
For effective propellant utilization, the rate at which tank can expulse the propellants should be ____________ and the amount of residual propellants should be ____________
The velocity of steam leaving the nozzle (V) is given by (where K = Nozzle coefficient or nozzle efficiency, and hd = Enthalpy or heat drop during expansion of steam in a nozzle)
The velocity of steam leaving the nozzle (V) is given by (where K = Nozzle coefficient or nozzle efficiency and hd = Enthalpy or heat drop during expansion of steam in a nozzle)
If the densities of the propellants are very different from one another, the pump head raise is ___________ for the lower-density propellant compared to higher-density propellant.
A simple impulse turbine has a mean blade speed of 250 m/s. The nozzle angle is 20° and the steam velocity from the nozzle is 600 m/s. The turbine uses 3000 kg/h of steam. The blade outlet angle is 25°. Determine the amount of energy converted to heat by blade friction if the blade friction factor is 0.86.
In a single stage impulse turbine nozzle angle is 20° and the mean blade speed is 300 m/s. Steam leaves the nozzle at a velocity of 700 m/s. Determine the exit velocity of the steam if the turbine blades are equiangular and frictionless.