The velocity of steam leaving the nozzle (V) is given by (where K = Nozzle coefficient or nozzle efficiency and h<sub>d</sub> = Enthalpy or heat drop during expansion of steam in a nozzle)

The velocity of steam leaving the nozzle (V) is given by (where K = Nozzle coefficient or nozzle efficiency, and hd = Enthalpy or heat drop during expansion of steam in a nozzle)

A

V = 44.72 hd K

B

V = 44.72 K hd

C

V = 44.72 K hd

D

V = 44.72 K hd

In a newly developed innovative idea brought up by CSIR in India, gas turbine exhaust gas are being utilized to convert feedwater into steam. Certain data of the experiment are as follows: mass flow rate of exhaust gas = 40 kg/hr, enthalpy of exhaust gas at the time of their exit from gas turbine is 600 kJ/kg, steam turbine output as measured by brake dynamometer = 60 hp-sec, thermal efficiency of steam power plant is 0.25, efficiency of exhaust gas in converting feedwater into steam is taken as 50%. Find the enthalpy of exhaust gas remaining after they generate steam from feedwater?

A

350.0KJ/Kg

B

241.2KJ/Kg

C

112.45KJ/Kg

D

512.56KJ/Kg

In a reaction turbine, the fixed blades and the moving blades are of the same shape but reversed in direction. The mean blade speed is 30 m/s. The absolute velocity of the steam leaving the nozzle is 90 m/s and the absolute velocity of steam leaving the moving blade is 64 m/s. Determine the nozzle angle.

A

20°

B

25°

C

30°

D

35°

Steam at 14 bar and 250°C enters a convergent-divergent steam nozzle and is discharged at 2 bar. Determine the nozzle efficiency if the velocity coefficient is 0.95. Neglect the initial velocity of steam.

A

95.65%

B

90.25%

C

99.65%

D

85.32%

The sensible heat factor during the heating and humidification process is given by (where h₁ = Enthalpy of air entering the heating coil, h₂ = Enthalpy of air leaving the heating coil, and hA = Enthalpy of air at the end of humidification process)

A

(hA - h2)/ (h1 - h2)

B

(h2 - hA)/ (h1 - h2)

C

(h1 - h2)/ (hA - h2)

D

(hA - h1)/ (h2 - h1)

The sensible heat factor during cooling and dehumidification process is given by (where h₁ = Enthalpy of air entering the cooling coil, h₂ = Enthalpy of air leaving the cooling coil, and hA = Enthalpy of air at the end of dehumidification process)

A

(hA - h2)/ (h1 - h2)

B

(h2 - hA)/ (h1 - h2)

C

(h1 - h2)/ (hA - h2)

D

(hA - h1)/ (h2 - h1)

The sensible heat factor during the heating and humidification process is given by (where h₁ = Enthalpy of air entering the heating coil, h₂ = Enthalpy of air leaving the heating coil and h_A = Enthalpy of air at the end of humidification process)

A

$$\frac{{{{\text{h}}_{\text{A}}} - {{\text{h}}_2}}}{{{{\text{h}}_1} - {{\text{h}}_2}}}$$

B

$$\frac{{{{\text{h}}_2} - {{\text{h}}_{\text{A}}}}}{{{{\text{h}}_1} - {{\text{h}}_2}}}$$

C

$$\frac{{{{\text{h}}_1} - {{\text{h}}_2}}}{{{{\text{h}}_{\text{A}}} - {{\text{h}}_2}}}$$

D

$$\frac{{{{\text{h}}_{\text{A}}} - {{\text{h}}_1}}}{{{{\text{h}}_2} - {{\text{h}}_1}}}$$

The sensible heat factor during cooling and dehumidification process is given by (where h₁ = Enthalpy of air entering the cooling coil, h₂ = Enthalpy of air leaving the cooling coil and h_A = Enthalpy of air at the end of dehumidification process)

A

$$\frac{{{{\text{h}}_{\text{A}}} - {{\text{h}}_2}}}{{{{\text{h}}_1} - {{\text{h}}_2}}}$$

B

$$\frac{{{{\text{h}}_2} - {{\text{h}}_{\text{A}}}}}{{{{\text{h}}_1} - {{\text{h}}_2}}}$$

C

$$\frac{{{{\text{h}}_1} - {{\text{h}}_2}}}{{{{\text{h}}_{\text{A}}} - {{\text{h}}_2}}}$$

D

$$\frac{{{{\text{h}}_{\text{A}}} - {{\text{h}}_1}}}{{{{\text{h}}_2} - {{\text{h}}_1}}}$$

Read the passage carefully and choose the best answer to each question out of the four alternatives and click the button corresponding to it. The first working steam powered vehicle was designed and most likely built by Ferdinand Verbies, a Flemish member of a Jesuit mission in China around 1672. It was a 65 cm long scale model toy for the Chinese Emperor, that was unable to carry a driver or a passenger. It is not known if Verbiest's model was ever built. Nicolas- Joseph Cugnot is widely credited with building the first full scale, self propelled mechanical vehicle or automobile in about 1769; he also created a steam powered tricycle. He constructed two steam tractors for the French Army, one of which is preserved in the French National Conservatory of Arts and Crafts. His inventions were however handicapped by problems of water supply and maintaining steam pressure. In 1801, Richard Trevithick built and demonstrated his Puffing Devil road locomotive, believed by many to be the first demonstration of a steam powered road vehicle. It was unable to maintain sufficient steam pressure for long periods. Sentiment against steam powered road vehicles led to the Locomotive Acts of 1865. In 1807 Nicephore Niepce and his brother Claude probably created the world's first internal combustion engine which they called Pyreolophore. The first fullscale, working steam powered tricycle was built by:

A

Verbiest

B

Cugnot

C

Trevithick

D

Niepce

Read the passage carefully and choose the best answer to each question out of the four alternatives and click the button corresponding to it. The first working steam powered vehicle was designed and most likely built by Ferdinand Verbies, a Flemish member of a Jesuit mission in China around 1672. It was a 65 cm long scale model toy for the Chinese Emperor, that was unable to carry a driver or a passenger. It is not known if Verbiest's model was ever built. Nicolas- Joseph Cugnot is widely credited with building the first full scale, self propelled mechanical vehicle or automobile in about 1769; he also created a steam powered tricycle. He constructed two steam tractors for the French Army, one of which is preserved in the French National Conservatory of Arts and Crafts. His inventions were however handicapped by problems of water supply and maintaining steam pressure. In 1801, Richard Trevithick built and demonstrated his Puffing Devil road locomotive, believed by many to be the first demonstration of a steam powered road vehicle. It was unable to maintain sufficient steam pressure for long periods. Sentiment against steam powered road vehicles led to the Locomotive Acts of 1865. In 1807 Nicephore Niepce and his brother Claude probably created the world's first internal combustion engine which they called Pyreolophore. Cugnot built steam tractors for:

A

The Chinese Emperor

B

The French Army

C

The Jesuit mission

D

The French Conservatory

The velocity of steam leaving the nozzle (V) is given by (where K = Nozzle coefficient or nozzle efficiency and h_d = Enthalpy or heat drop during expansion of steam in a nozzle)

Related Questions

The velocity of steam leaving the nozzle (V) is given by (where K = Nozzle coefficient or nozzle efficiency and hd = Enthalpy or heat drop during expansion of steam in a nozzle)

Related Questions

The velocity of steam leaving the nozzle (V) is given by (where K = Nozzle coefficient or nozzle efficiency and h_d = Enthalpy or heat drop during expansion of steam in a nozzle)