The sensible heat factor during the heating and humidification process is given by (where h₁ = Enthalpy of air entering the heating coil, h₂ = Enthalpy of air leaving the heating coil, and hA = Enthalpy of air at the end of humidification process)

The sensible heat factor during the heating and humidification process is given by (where h₁ = Enthalpy of air entering the heating coil, h₂ = Enthalpy of air leaving the heating coil and h_A = Enthalpy of air at the end of humidification process)

A

$$\frac{{{{\text{h}}_{\text{A}}} - {{\text{h}}_2}}}{{{{\text{h}}_1} - {{\text{h}}_2}}}$$

B

$$\frac{{{{\text{h}}_2} - {{\text{h}}_{\text{A}}}}}{{{{\text{h}}_1} - {{\text{h}}_2}}}$$

C

$$\frac{{{{\text{h}}_1} - {{\text{h}}_2}}}{{{{\text{h}}_{\text{A}}} - {{\text{h}}_2}}}$$

D

$$\frac{{{{\text{h}}_{\text{A}}} - {{\text{h}}_1}}}{{{{\text{h}}_2} - {{\text{h}}_1}}}$$

The sensible heat factor during cooling and dehumidification process is given by (where h₁ = Enthalpy of air entering the cooling coil, h₂ = Enthalpy of air leaving the cooling coil, and hA = Enthalpy of air at the end of dehumidification process)

A

(hA - h2)/ (h1 - h2)

B

(h2 - hA)/ (h1 - h2)

C

(h1 - h2)/ (hA - h2)

D

(hA - h1)/ (h2 - h1)

The sensible heat factor during cooling and dehumidification process is given by (where h₁ = Enthalpy of air entering the cooling coil, h₂ = Enthalpy of air leaving the cooling coil and h_A = Enthalpy of air at the end of dehumidification process)

A

$$\frac{{{{\text{h}}_{\text{A}}} - {{\text{h}}_2}}}{{{{\text{h}}_1} - {{\text{h}}_2}}}$$

B

$$\frac{{{{\text{h}}_2} - {{\text{h}}_{\text{A}}}}}{{{{\text{h}}_1} - {{\text{h}}_2}}}$$

C

$$\frac{{{{\text{h}}_1} - {{\text{h}}_2}}}{{{{\text{h}}_{\text{A}}} - {{\text{h}}_2}}}$$

D

$$\frac{{{{\text{h}}_{\text{A}}} - {{\text{h}}_1}}}{{{{\text{h}}_2} - {{\text{h}}_1}}}$$

The bypass factor (B. P. F.) in case of sensible heating of air is (Where td₁ = Dry bulb temperature of air entering the heating coil, td₂ = Dry bulb temperature of air leaving the heating coil, and td₃ = Dry bulb temperature of heating coil)

A

(td₂ - td₃)/(td₃ - td₁)

B

(td₃ - td₂)/(td₃ - td₁)

C

(td₃ - td₁)/(td₂ - td₃)

D

(td₃ - td₁)/(td₃ - td₂)

The bypass factor (B.P.F.) in case of sensible heating of air is (Where td₁ = Dry bulb temperature of air entering the heating coil, td₂ = Dry bulb temperature of air leaving the heating coil and td₃ = Dry bulb temperature of heating coil)

A

$$\frac{{{\text{t}}{{\text{d}}_2} - {\text{t}}{{\text{d}}_3}}}{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_1}}}$$

B

$$\frac{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_2}}}{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_1}}}$$

C

$$\frac{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_1}}}{{{\text{t}}{{\text{d}}_2} - {\text{t}}{{\text{d}}_3}}}$$

D

$$\frac{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_1}}}{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_2}}}$$

The bypass factor, in case of sensible cooling of air, is given by (where td₁ = Dry bulb temperature of air entering the cooling coil, td₂ = Dry bulb temperature of air leaving the cooling coil, and td₃ = Dry bulb temperature of the cooling coil)

A

(td₁ -td₃)/( td₂ -td₃)

B

(td₂ -td₃)/( td₁ -td₃)

C

(td₃ -td₁)/( td₂ -td₃)

D

(td₃ -td₂)/( td₁ -td₃)

The bypass factor, in case of sensible cooling of air, is given by (where td₁ = Dry bulb temperature of air entering the cooling coil, td₂ = Dry bulb temperature of air leaving the cooling coil and td₃ = Dry bulb temperature of the cooling coil)

A

$$\frac{{{\text{t}}{{\text{d}}_1} - {\text{t}}{{\text{d}}_3}}}{{{\text{t}}{{\text{d}}_2} - {\text{t}}{{\text{d}}_3}}}$$

B

$$\frac{{{\text{t}}{{\text{d}}_2} - {\text{t}}{{\text{d}}_3}}}{{{\text{t}}{{\text{d}}_1} - {\text{t}}{{\text{d}}_3}}}$$

C

$$\frac{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_1}}}{{{\text{t}}{{\text{d}}_2} - {\text{t}}{{\text{d}}_3}}}$$

D

$$\frac{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_2}}}{{{\text{t}}{{\text{d}}_1} - {\text{t}}{{\text{d}}_3}}}$$

Consider the following statements for the appropriate context: 1. The Relative Humidity of air remains constant during sensible heating or cooling 2. The Dew Point Temperature of air remains constant during sensible heating or cooling 3. The total enthalpy of air remains constant during adiabatic cooling 4. It is necessary to cool the air below its Dew Point Temperature for dehumidifying Which of the above statements are correct?

A

1, 2 and 3

B

1, 2 and 4

C

3 and 4 only

D

2, 3 and 4

In a psychrometric process, the sensible heat added is 30 kJ/s and the latent heat added is 20 kJ/s. The sensible heat factor for the process will be

A

0.3

B

0.6

C

0.67

D

1.5

Sensible heat factor is given by (where S.H. = Sensible heat, and L.H. = Latent heat)

A

S.H/(S.H + L.H)

B

(S.H + L.H) /S.H

C

(L.H - S.H)/S.H

D

S.H/(L.H - S.H)

The sensible heat factor during the heating and humidification process is given by (where h₁ = Enthalpy of air entering the heating coil, h₂ = Enthalpy of air leaving the heating coil, and hA = Enthalpy of air at the end of humidification process)

Related Questions