The bypass factor, in case of sensible cooling of air, is given by (where td₁ = Dry bulb temperature of air entering the cooling coil, td₂ = Dry bulb temperature of air leaving the cooling coil, and td₃ = Dry bulb temperature of the cooling coil)

The bypass factor (B. P. F.) in case of sensible heating of air is (Where td₁ = Dry bulb temperature of air entering the heating coil, td₂ = Dry bulb temperature of air leaving the heating coil, and td₃ = Dry bulb temperature of heating coil)

A

(td₂ - td₃)/(td₃ - td₁)

B

(td₃ - td₂)/(td₃ - td₁)

C

(td₃ - td₁)/(td₂ - td₃)

D

(td₃ - td₁)/(td₃ - td₂)

The bypass factor, in case of sensible cooling of air, is given by (where td₁ = Dry bulb temperature of air entering the cooling coil, td₂ = Dry bulb temperature of air leaving the cooling coil and td₃ = Dry bulb temperature of the cooling coil)

A

$$\frac{{{\text{t}}{{\text{d}}_1} - {\text{t}}{{\text{d}}_3}}}{{{\text{t}}{{\text{d}}_2} - {\text{t}}{{\text{d}}_3}}}$$

B

$$\frac{{{\text{t}}{{\text{d}}_2} - {\text{t}}{{\text{d}}_3}}}{{{\text{t}}{{\text{d}}_1} - {\text{t}}{{\text{d}}_3}}}$$

C

$$\frac{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_1}}}{{{\text{t}}{{\text{d}}_2} - {\text{t}}{{\text{d}}_3}}}$$

D

$$\frac{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_2}}}{{{\text{t}}{{\text{d}}_1} - {\text{t}}{{\text{d}}_3}}}$$

The bypass factor (B.P.F.) in case of sensible heating of air is (Where td₁ = Dry bulb temperature of air entering the heating coil, td₂ = Dry bulb temperature of air leaving the heating coil and td₃ = Dry bulb temperature of heating coil)

A

$$\frac{{{\text{t}}{{\text{d}}_2} - {\text{t}}{{\text{d}}_3}}}{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_1}}}$$

B

$$\frac{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_2}}}{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_1}}}$$

C

$$\frac{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_1}}}{{{\text{t}}{{\text{d}}_2} - {\text{t}}{{\text{d}}_3}}}$$

D

$$\frac{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_1}}}{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_2}}}$$

What is the formula of logarithmic mean temperature in terms of By-pass factor? b) Tm = td2 – td1 / log10 c) Tm = td2 – td1 / loge d) Tm = td2 – td3 / loge

A

Tm = td2 – td1 / loge

B

1/BPF

C

1/BPF

D

1/BPF

What is the By-pass factor for cooling coil, if td1 = temperature at entry, td2 = temperature at exit and td3 = coil temperature?

A

td3 – td1 / td3 – td1

B

td3 – td2 / td3 – td1

C

td3 – td2 / td2 – td1

D

td2 – td3 / td1 – td3

What is the contact factor for cooling coil, if td1 = temperature at entry, td2 = temperature at exit and td3 = coil temperature?

A

td1 – td2 / td1 – td3

B

td2 – td1 / td3 – td1

C

td3 – td2 / td2 – td1

D

td3 – td2 / td1 – td2

What is the By-pass factor for heating coil, if td1 = temperature at entry, td2 = temperature at exit and td3 = coil temperature?

A

td3 – td1 / td3 – td1

B

td3 – td2 / td3 – td1

C

td3 – td2 / td2 – td1

D

td3 – td2 / td1 – td2

The sensible heat factor during cooling and dehumidification process is given by (where h₁ = Enthalpy of air entering the cooling coil, h₂ = Enthalpy of air leaving the cooling coil, and hA = Enthalpy of air at the end of dehumidification process)

A

(hA - h2)/ (h1 - h2)

B

(h2 - hA)/ (h1 - h2)

C

(h1 - h2)/ (hA - h2)

D

(hA - h1)/ (h2 - h1)

The sensible heat factor during cooling and dehumidification process is given by (where h₁ = Enthalpy of air entering the cooling coil, h₂ = Enthalpy of air leaving the cooling coil and h_A = Enthalpy of air at the end of dehumidification process)

A

$$\frac{{{{\text{h}}_{\text{A}}} - {{\text{h}}_2}}}{{{{\text{h}}_1} - {{\text{h}}_2}}}$$

B

$$\frac{{{{\text{h}}_2} - {{\text{h}}_{\text{A}}}}}{{{{\text{h}}_1} - {{\text{h}}_2}}}$$

C

$$\frac{{{{\text{h}}_1} - {{\text{h}}_2}}}{{{{\text{h}}_{\text{A}}} - {{\text{h}}_2}}}$$

D

$$\frac{{{{\text{h}}_{\text{A}}} - {{\text{h}}_1}}}{{{{\text{h}}_2} - {{\text{h}}_1}}}$$

What is the By-pass factor for cooling coil, if td1 = 49°C, td2 = 36°C and td3 = 30°C?

A

0.315

B

0.31

C

0.320

D

0.3

The bypass factor, in case of sensible cooling of air, is given by (where td₁ = Dry bulb temperature of air entering the cooling coil, td₂ = Dry bulb temperature of air leaving the cooling coil, and td₃ = Dry bulb temperature of the cooling coil)

Related Questions