Bissoy.com
Doctors Medicines MCQs Q&A

Which stage of the fatigue crack is most significant in the high cycle fatigue?

Which stage of the fatigue crack is most significant in the high cycle fatigue? Correct Answer Slip band crack growth

The Slip band crack growth or also known as stage-I of the crack growth comprises of the largest segment in the high cycle fatigue.

Related Questions

Which stage of the fatigue crack is most significant in the low cycle fatigue?
Consider the following statements regarding crack : 1. Crack is more likely to occur in the regions of discontinuity such as oil holes. 2. Crack is more likely to occur in the regions of irregularities in machining operations such as stamp mark. 3. Crack is more likely to occur in the internal cracks due to defects in materials like blow holes. Which of the above statements are correct ? 
Match List-I with List-II and select the correct answer using the code given below the Lists: List I (Low-Latitude Climate) List I (Characteristic) A. Wet Equatorial 1. Uniform temperatures, mean near 27°C  B. Monsoon and trade wind coastal 2. Marked temperature cycle with very high temperature before the rainy season C. Wet-dry tropical  3. Temperatures show an annual cycle with a high temperature in the high-Sun season Strong temperature cycle. with intense temperature during the high-Sun season  D. Dry tropical 4. Strong temperature cycle, with intense temperature during the high-Sun season
The ductile material gives best result in the high strain amplitude or high cycle fatigue, while the strong material gives best result in high-stress low cycle fatigue.
The crack propagation rate with stress is given as ______ Where; -> da/dN is crack growth with each cycle -> C is constant -> σm is mean stress -> σa is alternating stress -> a is the crack length -> m and n are constant
There are 2 candidates A and B. Probability that A will crack the exam is 3/4 and that B will crack the exam is 2/3. What will be the probability that only one will crack the exam?
The young’s modulus of the steel is 600 MPa, and the plastic stress required to extend the crack is 50*10-9, and the initial crack length is 2 microns. Find the fracture stress required to crack the material?
According to Irwin’s correction of plasticity at the crack tip, the sufficient crack length is given as the actual crack length plus the radius of the plastic zone. The radius of the plastic zone (rp) in case of plane stress is given as ________
According to Irwin’s correction of plasticity at the crack tip, the effective crack length is given as the actual crack length plus the radius of the plastic zone. The radius of the plastic zone (rp) in case of plane strain is given as ________
Which code does not match? - Stage of Unification of Rajasthan Date (A) Third stage 18 April 1948 (B) Fourth stage 30 March 1948 (C) Fifth stage 15 May 1949 (D) Sixth stage 26 January 1950