Bissoy.com
Doctors Medicines MCQs Q&A

Which draught system is used as conjunction with chimney draught?

Which draught system is used as conjunction with chimney draught? Correct Answer Forced steam draught

The high velocity steam coming out from the nozzle drags the air column along with it creating suction. The kinetic energy of air and steam mixture is converted into pressure energy forcing air through the coal bed to the furnace. So, Forced steam draught is used as a booster in conjunction with chimney draught.

Related Questions

Draught produced by a tall chimney due to density difference between hot flue gas inside the Chimney and atmospheric air outside the chimney is more appropriately known as the __________ draught.
Determine the height of the chimney to produce a static draught of 22mm of water if the mean flue gas temperature in chimney is 290oC and ambient temperature in boiler house is 20oC. The gas constant for air is 29.26Kgm/Kgk and for chimney flue gas is 26.2 Kgfm/Kgk. Assume reading as 760mm of mercury?
The draught (in mm of water), for maximum discharge of flue gases through the chimney, is given by (where H = Height of the chimney in meters and T1 = Absolute temperature of air outside the chimney in K)
Determine the height of the chimney to get net draught of 12mm if the total losses are 4mm. the temperature of air is 25oC and the temperature of chimney gases is 300oC. The mass of air used per kg of fuel used is 18kg. One kg of air occupies a volume of 0.7734m3 at normal temperature?
The draught produced by steel chimney as compared to that produced by brick chimney for the same height is
The draught produced, for a given height of the chimney and given mean temperature of chimney gases
Determine the height of chimney above grate level. Where diameter of chimney is 1.75m and produces a draught of 1.8cms of water. Temperature of flue gases is 290oC. The flue gases formed per kg of fuel burnt are 23kg. Neglect the losses and assume atmospheric temperature as 20oC?
What is the ratio of draught in terms of column of hot gases to the chimney height when the discharge though chimney is maximum?
The draught produced by the chimney is due to the difference in densities between the column of hot gases inside the chimney and the cold air present outside.
A chimney of height 45 m is full of hot gases at temperature 330°C. If the discharge through the chimney is maximum, determine the draught in terms of column of hot gases. The ambient is 25°C.