Bissoy.com
Doctors Medicines MCQs Q&A

The number of conductors used in the construction of coupled line couplers is fixed.

The number of conductors used in the construction of coupled line couplers is fixed. Correct Answer false

Since the method of power transmission in coupled line couplers is wireless power transmission by the interaction of electromagnetic fields, any number of wires can be used. But as a standard, 3 lines are used in the construction of these couplers.

Related Questions

Lightening conductors are used to protect building from lightning strikes. Which of the following statements is/are true about lightening conductors? 1) Lightening conductors create an electric field at its top that lightning strikes it preferentially 2) Lightning conductors reduce the effect of the strike by uniformly distributing the charge (current) over the surface of the building 3) Lightning conductors take all the charge (current) to deep down in the earth 4) Lightning conductors must be installed at a place taller than the building Select the correct answer using the code given below
Symmetric tapered coupled line couplers offer higher bandwidth when compared to other forms of couplers.
In coupled line directional couplers, power from one line to another is transmitted through a microstrip line running between them.
A number of three-port single-mode fiber couplers are used in the fabrication of a ladder coupler with 16 output ports. The three-port couplers each have an excess loss of 0.2 dB along with a splice loss of 0.1 dB at the interconnection of each stage. Determine the excess loss.
A three phase 50 Hz transmission line has flat horizontal spacing with 3.5 m between adjacent conductors. The conductors are No. 2/0 hard drawn copper (outside diameter = 1.05cm). The voltage f the line is 110 kV. The line charging current per km of the line is _______________
A three phase 50 Hz transmission line has flat horizontal spacing with 3.5 m between adjacent conductors. The conductors are No. 2/0 hard drawn copper (outside diameter = 1.05cm). The voltage f the line is 110 kV. The line charging current per conductor of the line is _____________
A power line is coupled capacitively through various parasitic capacitances to a shielded signal line as shown in the figure. The conductive shield is grounded solidly at one end. Assume that the length of the signal wire extending beyond the shield, and the shield resistance are negligible. The magnitude of the noise voltage coupled to the signal line is
Hybrid couplers are also a type of directional couplers.
A three phase 50 Hz transmission line has flat horizontal spacing with 3.5 m between adjacent conductors. The conductors are No. 2/0 hard drawn copper (outside diameter = 1.05cm). The voltage f the line is 110 kV. The capacitance to neutral per kilometre of line is
A three phase 50 Hz transmission line has flat horizontal spacing with 3.5 m between adjacent conductors. The conductors are No. 2/0 hard drawn copper (outside diameter = 1.05cm). The voltage f the line is 110 kV. The capacitive reactance to neutral per kilometre of line is ____________