If an isometric projection is drawn with true measurements but not with isometric scale then the drawings are called ____________

If isometric projection of an object is drawn with true lengths the shape would be same and size is how much larger than actual isometric projection?

A

25%

B

29.5%

C

22.5%

D

33.3%

If an isometric drawing is made use of isometric scale then the drawings are called ___________

A

Isometric projection

B

Isometric view

C

Isometric perception

D

Orthographic view

What is the difference between isometric projection and isometric drawings?

A

Isometric drawings are drawn using true lengths whereas isometric projections are foreshortened by 18% of true length

B

Isometric projections are drawn using true lengths whereas isometric drawings are foreshortened by 18% of true length

C

Isometric drawings are drawn using true lengths whereas isometric projections are foreshortened by 12% of true length

D

Isometric projections are drawn using true lengths whereas isometric drawings are foreshortened by 12% of true length

In the question two statements are given, followed by two conclusions, I and II. You have to consider the statements to be true even if it seems to be at variance from commonly known facts. You have to decide which of the given conclusions, if any, follows from the given statements. Statement I: All icons are drawings Statement II: No portraits are icons Conclusion I: Some drawings are portraits Conclusion II: All portraits are drawings

A

Only conclusion I follows

B

Only conclusion II follows

C

Both conclusions I and II follow

D

Neither conclusion I nor conclusion II follows

Various measurements are made on an NMOS amplifier for which the drain resistor RD is 20 kΩ. First, DC measurements show the voltage across the drain resistor, VRD, to be 2 V and the gate-to-source bias voltage to be 1.2 V. Then, ac measurements with small signals show the voltage gain to be −10 V/V. What is the value of Vt for this transistor?

A

0.7V

B

0.8V

C

0.9V

D

1.0V

Various measurements are made on an NMOS amplifier for which the drain resistor RD is 20 kΩ. First, DC measurements show the voltage across the drain resistor, VRD, to be 2 V and the gate-to-source bias voltage to be 1.2 V. Then, ac measurements with small signals show the voltage gain to be −10 V/V. If the process transconductance parameter is 50μA/V2, what is the MOSFET’s W/L?

A

25

B

50

C

75

D

100

In _________ the parallel projection rays are not perpendicular to the viewing plane as with orthographic projection, but strike the projection plane at an angle other than ninety degrees.

A

isometric projections

B

orthographic projections

C

axonometric projection

D

oblique projections

What is the APGAR scale? A. Scale to measure the height of mountains B. Time Measuring Scale C. Scale to determine the physical condition of a newborn D. Longevity scale

A

C

B

A

C

B

D

Arrange in the correct sequence from the lowest to the highest scale of measurement.
1. Interval scale
2. Ordinal scale
3. Ratio scale
4. Nominal scale

A

4, 2, 1, 3

B

1, 2, 3, 4

C

2, 1, 3, 4

D

2, 4, 3, 1

Projection TVs are available in two main configurations called front projection and rear projection.

A

True

B

False

If an isometric projection is drawn with true measurements but not with isometric scale then the drawings are called ____________

Related Questions