Bissoy.com
Doctors Medicines MCQs Q&A

In a PNP transistor operating in active region, the main stream of current is_________

In a PNP transistor operating in active region, the main stream of current is_________ Correct Answer diffusion of holes

The emitter-base junction is forward biased while collector-base junction is reversed biased. The transistor now operates in active region. Here, it can be used for amplification purpose.

Related Questions

The fresh feed to an ammonia synthesis reactor contains nitrogen, hydrogen and 2.0 mole per cent inerts. The molar ratio of H2:N2 is 3:1. The product stream consists of pure ammonia. Since conversion in the reactor is only 15%, a recycle stream is used and in order to avoid build-up of inerts, a purge stream is withdrawn. The rate of purge stream is adjusted to keep inert concentration in the recycle stream at 8 mole per cent. For a fresh feed rate of 100 moles/hr. Note that recycle stream contains only nitrogen, hydrogen and inerts. The N2:H2 ratio of 1:3 is maintained in every process stream, and calculate the moles of nitrogen entering the reactor and in the recycle stream?
The fresh feed to an ammonia synthesis reactor contains nitrogen, hydrogen and 2.0 mole per cent inerts. The molar ratio of H2:N2 is 3:1. The product stream consists of pure ammonia. Since conversion in the reactor is only 15%, a recycle stream is used and in order to avoid build-up of inerts, a purge stream is withdrawn. The rate of purge stream is adjusted to keep inert concentration in the recycle stream at 8 mole per cent. For a fresh feed rate of 100 moles/hr. Note that recycle stream contains only nitrogen, hydrogen and inerts. The N2:H2 ratio of 1:3 is maintained in every process stream, and calculate the number of moles, moles of inerts and moles of hydrogen in the recycle stream?
The fresh feed to an ammonia synthesis reactor contains nitrogen, hydrogen and 2.0 mole per cent inerts. The molar ratio of H2:N2 is 3:1. The product stream consists of pure ammonia. Since conversion in the reactor is only 15%, a recycle stream is used and in order to avoid build-up of inerts, a purge stream is withdrawn. The rate of purge stream is adjusted to keep inert concentration in the recycle stream at 8 mole per cent. For a fresh feed rate of 100 moles/hr. Note that recycle stream contains only nitrogen, hydrogen and inerts. The N2:H2 ratio of 1:3 is maintained in every process stream. Calculate the moles of ammonia produced.
The following question, there are three statements I, II and III. Read the question carefully and mark your answer according to which statements(s) is/are sufficient to the answer the question. What is the Speed of the stream? Statement I: The distance between two points A and B is a km and the boat cover 90km along the stream in 5 hours. Statement II: The distance travelled along the stream is four times the total distance and that against the stream is three times the total distance Statement III: The total time taken against the stream is 10% more than that along the stream
For a pnp transistor in the active region the value of Vce (potential difference between the collector and the base) is
Which of the following is true for a pnp transistor in active region?
You configure your Windows 2000 Server as a print server. You install a second PnP Network adapter to improve the performance. The first adapter uses IRQ11, and the second adapter uses IRQ5. The server is now unable to print to print devices connected to a non-PnP LPT2 port adapter. You want to continue to use the print devices connected to your print server. What should you do?
Consider an NMOS transistor having kn= 2 mA/V2. Let the transistor be biased at VOV = 1V. For operation in saturation, what dc bias current ID results? If a +0.1-V signal is superimposed on VGS, find the corresponding increment in collector current by evaluating the total collector current ID and subtracting the dc bias current ID.
Thermal runaway in a transistor biased in the active region is due to 1. heating of the transistor. 2. change in β due to an increase in temperature. 3. change in reverse collector saturation current due to a rise in temperature. 4. base-emitter voltage VBE which decreases with rise in temperature. Which of the above statements is/are correct?
Thermal runaway in a transistor biased in the active region is primarily due to a) heating of the transistor b) changes in β, which increases with temperature c) base emitter voltage VBE which decreases with rise in temperature d) change in reverse saturation current due to rise in temperature Which of the following options is correct?