An ideal choke takes a current of 8A when connectd to an AC source of 100V and 50 Hz. A pure resistor under the same condition strikes a current of 10

Question

An ideal choke takes a current of 8A when connectd to an AC source of 100V and 50 Hz. A pure resistor under the same condition strikes a current of 10

An ideal choke takes a current of 8A when connectd to an AC source of 100V and 50 Hz. A pure resistor under the same condition strikes a current of 10A. If two are connected in series to an AC supply of 100V and 40Hz, then the current in the series combination of above resistor and inductor `sqrt(10x)`A. Find value of x
A. `3sqrt(2)A`
B. `sqrt(2)A`
C. `5sqrt(2)A`
D. `2sqrt(2)A`

Monjur Alahi

4 views

2025-01-04 04:42

1 Answers

Related Questions

A source frequency f gives t beats when sounded with a frequency 200Hz. The second harmonic of same source gives 10 beats when sounded with a source o

2 Answers 5 Views

A battery supplies a current of 0.9 A through a `2 Omega` resistor and a current of 0.3 A through a `7 Omega` resistor. Calculate the emf and internal

2 Answers 4 Views

The domestic power supply of 220 V, 50 Hz is connected to a resistor. What is the time taken by the alternating current flowing in the resistor, to ch

2 Answers 4 Views

When an alternating voltage of 100V, 50 Hz is applied to a choke coil, it takes a current of 10 A and the power is 500 W. What is the choke coil?

2 Answers 4 Views

A current of 1 A flows through a coil, when a 100 V d.c. is applied to it. But a current of 0.5 A flows through the same coil, when a 100V a.c. of fre

2 Answers 4 Views

A alternating voltage given by `V = 140 sin 314 t` is connected across a pure resistor of 50 ohm. Find the rms current through the resistor.

2 Answers 5 Views

A capacitor, a resistor of `5Omega` and an inductor of 50mH are in series with an ac source marked 100V,50Hz. It is found that the voltage is in phase

2 Answers 4 Views

A current of 1 A flows in a coll when connected to a 100 V dc source. IF the same coll is connected to a 100 V, 50 Hz ac source, a current od 0.5 A fl

2 Answers 5 Views

When a choke is connected in series with a lamp in dc line, the lamp shines brightly. Insertion of an iron core in the choke does not affect the brigh

2 Answers 4 Views

When an ideal choke is connected to an ac source of 100V and 50Hz, a current of 8 A flows through the circuit, A current of 10 A flows throught the ci

2 Answers 5 Views

Salim Ahmed Kawsar · Accepted Answer · 2023-02-05T15:29:48+06:00

Salim Ahmed Kawsar

Correct Answer - C
`X=(e)/(I)=(100)/(8)=12.5Omega`
Now `Xpropf`
`therefore (X^(2))/(X_(1))=(f_(2))/(f_(1))`
`X_(2)=(40xx12.5)/(50)=10Omega`
Now `Z=sqrt(R^(2)xxX_(2)^(2))=sqrt((10)^(2)+(10)^(2))`
`=10sqrt(2)Omega`
Now `I=(e)/(Z)=(100)/(10sqrt(2))=(10)/(sqrt(2))=(5xx2)/(sqrt(2))`
`=5sqrt(2)A`

4 views Answered 2023-02-05 15:29