A metal wire of diameter 1mm is held on two knife edges separated by a distance of 50cm . The tension in the wire is 100 N. the wire vibrates with its

Question

A metal wire of diameter 1mm is held on two knife edges separated by a distance of 50cm . The tension in the wire is 100 N. the wire vibrates with its

A metal wire of diameter 1mm is held on two knife edges separated by a distance of 50cm . The tension in the wire is 100 N. the wire vibrates with its fundamental frequency and a vibrating tuning fork together produce 5 beat/s. The tension in the wire is the reduced to 81N. When the two are excited , beat are heard at the same rate, then the frequency of the fork will be ,
A. 45 Hz
B. 95 Hz
C. 100 Hz
D. 50 Hz

Monjur Alahi

5 views

2025-01-04 04:42

1 Answers

Related Questions

A rope 1 cm in diameter breaks, if the tension in it exceeds 500 N. The maximum tension that may be given to similar rope of diameter 3 cm is

2 Answers 4 Views

A segment of wire vibrates with fundamental frequency of 40 Hz under a tension of 9 kg-wt. Then, tension at which the fundamental frequency of the sam

2 Answers 4 Views

A wire under tension vibrates with a fundamental frequency of 600 Hz. If the length of the wire is doubled, the radius is halved and the wire is made

2 Answers 4 Views

The length of a metal wire is `l_(1)` when the tension in it is `T_(1)` and is `l_(2)` when the tension is `T_(2)`. Then natural length of the wire is

2 Answers 4 Views

The length of a metal wire is l when the tension is F and x l when the tension si y F. Then the natural length of the wire is

2 Answers 4 Views

A wire under a tension vibrates with fundamental frequency of 256 Hz . What should be the fundamental frequency of the wire if its length is half, thi

2 Answers 5 Views

A piano wire having a diameter of `0.90 mm` is replaced by another wire of the same material but with a diameter of `0.93 mm`.If the tension of the wi

2 Answers 6 Views

The string of monochord , vibrates 100 times a second. Its length is doubled and its tension is altered unitl it makes 150 vib/s . What is the ratio o

2 Answers 6 Views

A wire under tension vibrates with a frequency of 450Hz. What would be the fundamental frequency, if the wire were half as long, twice as thick and un

2 Answers 4 Views

The stirng stretched by tension T and length L vibrates in resonance with a tuning fork of frequency n. the tension in the stretched string is increas

2 Answers 4 Views

Salim Ahmed Kawsar · Accepted Answer · 2023-02-05T15:29:48+06:00

Correct Answer - B
`n_1 gt N gt n_2`
`therefore n_1 - N " and " N-n_2 = 5`
`n_1 - n_2 =10 " "….(i)`
`n_1 prop sqrt(T_1) " and " n_2 prop sqrt(T_2)`
`therefore n_1/n_2 = sqrt(T_1/T_2) therefore n_1/n_2 = 10/9`
`n_1 = 10/9 n_2`
Substitute `n_1` is equation (i), we have
`10/9 n_2-n_2 = 10 therefore n_2=90`
`N=n_2+5 = 90+5 = 95Hz`