Share with your friends

Check the bottom of the base for a nut, (it may be covered by felt, peel the felt back from the edge). If the nut is loose, tighten it. Then check below the socket base at the (threaded tube) nipple. If there is a nut there, tighten it towards the lamp base. Above that nut, (if any) should be the socket base. The socket base connects the lamp socket to the nipple and allows the wire to rise up and connect to the bottom of the lamp socket (the part that holds the bulb). Check the side of the base for a set screw. Loosen the set screw and twist the entire socket base towards the lamp bottom. Then resecure the set screw.

Talk Doctor Online in Bissoy App