How do you drill through ceramic tile without breaking it?

You'll need to use an abrasive bit and word very slowly. Keep the drill bit wet, because it's going to get hot very quickly. Once you get through the top...

Don't apply too much pressure and keep the drill at a low speed. This can keep you from cracking the tile.

You can use a regular household drill, but you'll need to use an abrasive diamond drill bit. Use the drill on low speed, and keep the drill bit wet with...

The trick is to go slowly, use a good sharp bit, and ensure that the section of material you are drilling is supported and will not bend, twist, or otherwise...

You can typically find primer and paint that are specifically made for tile at a paint store.

Use an electric drill with a masonry bit. Start slowly and increase speed and pressure as needed. Be patient.

Acetone is a possible solution, but be careful of the fumes. Also use a good scraper.